Pineapple leaf fibers are abundant but not completely utilized because of the production methods. In this research, the steam explosion process combined with traditional methods including steam explosion after retting, retting after steam explosion, steam explosion after scraping, and hand-scraping only were employed. And they were characterized by X-ray diffraction, scanning electron microscopy, gel permeation chromatography, Fourier-transform infrared,` chemical composition, and mechanical test. Results showed that the fibers obtained by steam explosion after scraping method contain the highest percentage of cellulose, the lowest percentage of hemicellulose and lignin, and also the best crystallinity and breaking tenacity with a reasonable degree of polymerization.
Design and synthesis of flexible and self-supporting electrode materials in high-performance lithium storage is significant for applications in the field of smart wearable devices. Herein, flexible carbon nanofiber membranes with uniformly distributed molybdenum dioxide (MoO2) nanocrystals are fabricated by a needlefree electrospinning method combined with the subsequent carbonization process, which exhibits outstanding structural stability under abrasion and deformation. The as-fabricated lithium-ion batteries (LIBs) exhibit a high discharge of 450 mAh g−1 after 500 cycles at 2000 mA g−1 by using the MoO2/C nanofiber membrane as the self-supporting anode. Further, the nanofibers structure remains intact after 500 cycles, which reflects the excellent stability of the materials. This study provides a simple and effective method for the preparation of MoO2/C nanofiber materials, which can not only maintain its excellent electrochemical and physical properties, but also easily realize large-scale production. It is undoubtedly beneficial for the development of flexible LIBs and smart wearable devices.
Plant dye is a promising dyestuff to be used in textiles due to its unique environmental compatibility. However, currently there is no effective method for the identification of plant-dyed and chemical-dyed textiles. In this study, near-infrared (NIR) spectroscopy combined with three kinds of pattern recognition methods, namely soft independent modeling of class analogy (SIMCA), partial least squares (PLS) regression and principal component regression (PCR), were applied to identify cotton fabrics dyed with plant and chemical dyes. A total of 336 plant dye and chemical dye dyed cotton fabrics were prepared and the NIR spectra were collected; 267 samples were used as the calibration set, while the remaining 69 samples were used as the validation set. After pretreatment with the Savitzky–Golay first derivative, the calibration model was constructed. In the SIMCA model, the correct recognition rate values of the calibration and prediction sets were 100% and 98.55%, respectively. The PLS model showed that the number of principal components (PCs) and the correlation coefficient ( R2) were 8 and 0.9978, respectively, and the results of PCR were PC = 10, R2 = 0.9937. Both methods were satisfactory for the predicted results. The overall results indicated that NIR spectroscopy could be used for rapid and nondestructive identification of plant-dyed cotton fabrics and chemical-dyed cotton fabrics.