Detailed knowledge of nearshore topography and bathymetry is required for a wide variety of purposes, including ecosystem protection, coastal management, and flood and erosion monitoring and research, among others. Both topography and bathymetry are usually studied separately; however, many scientific questions and challenges require an integrated approach. LiDAR technology is often the preferred data source for the generation of topobathymetric models, but because of its high cost, it is necessary to exploit other data sources. In this regard, the main goal of this study was to present a methodological proposal to generate a topobathymetric model, using low-cost unmanned platforms (unmanned aerial vehicle and unmanned surface vessel) in a very shallow/shallow and turbid tidal environment (Bahía Blanca estuary, Argentina). Moreover, a cross-analysis of the topobathymetric and the tide level data was conducted, to provide a classification of hydrogeomorphic zones. As a main result, a continuous terrain model was built, with a spatial resolution of approximately 0.08 m (topography) and 0.50 m (bathymetry). Concerning the structure from motion-derived topography, the accuracy gave a root mean square error of 0.09 m for the vertical plane. The best interpolated bathymetry (inverse distance weighting method), which was aligned to the topography (as reference), showed a root mean square error of 0.18 m (in average) and a mean absolute error of 0.05 m. The final topobathymetric model showed an adequate representation of the terrain, making it well suited for examining many landforms. This study helps to confirm the potential for remote sensing of shallow tidal environments by demonstrating how the data source heterogeneity can be exploited.

The aim of this work is to evaluate the applicability of the 3D model obtained through Structure-from-Motion (SFM) from unmanned aerial vehicle (UAV) imagery, in order to characterize bioerosion patterns (i.e., cavities for roosting and nesting) caused by burrowing parrots on a cliff in Bahía Blanca, Argentina. The combined use of SFM-UAV technology was successfully applied for the 3D point cloud model reconstruction. The local point density, obtained by means of a sphere of radius equal to 0.5 m, reached a mean value of 9749, allowing to build a high-resolution model (0.013 m) for resolving fine spatial details in topography. To test the model, we compared it with another point cloud dataset which was created using a low cost do-it-yourself terrestrial laser scanner; the results showed that our georeferenced model had a good accuracy. In addition, an innovative method for the detection of the bioerosion features was implemented, through the processing of data provided by SFM like color and spatial coordinates (particularly the y coordinate). From the 3D model, we also derived topographic calculations such as slope angle and surface roughness, to get associations between the surface topography and bioerosion features.

The accuracy assessment of three different Normalized Difference Water indices (NDWIs) was performed in La Salada, a typical lake in the Pampean region. Data were gathered during April 2019, a period in which floods occurred in a large area in the Southwest of the Buenos Aires Province (Argentina). The accuracy of the estimations using spaceborne medium-resolution multi-spectral imaging and the reliability of three NDWIs to highlight shallow water features in satellite images were evaluated using a high-resolution airbone imagery as ground truth. We show that these indices computed using Landsat-8 and Sentinel-2 imagery are only loosely correlated to the actual flooded area in shallow waters. Indeed, NDWI values vary significantly depending on the satellite mission used and the type of index computed.

An assessment of wind energy potential was carried out in five sites (four onshore and one offshore) in South-West (SW) of Buenos Aires province (Argentina). We use high-resolution wind data (2 and 5 min) for the period 2009–2012. The power law was used to estimate the wind speed at 30, 40, and 60 m height from the anemometer position. Turbulence intensity and wind direction were analyzed. Statistical analyses were conducted using two-parameter Weibull distribution. A techno-economic analysis based on a set of commercial wind turbines was performed in those sites. The results derived from this work indicate that the SW of Buenos Aires province represents a promising area for the wind energy extraction, which would encourage the construction of wind farms for electricity generation.

Cliffed (and rocky) coasts are geomorphic features occurring in about 80% of the coastline of the world and are strongly influenced by a broad range of both natural and anthropogenic processes that may cause serious erosion problems. Since the sea wave motion is a fundamental driver of cliff erosion, the cliffs become sensitive to increasing of global sea levels and to extreme weather events, which are both associated with global warming. Because of its importance, a considerable amount of investigations on coastal cliff erosion (CCE) were reported during the last decades. A bibliometric analysis is an useful tool to identify patterns of a given theme from a large body of academic literature. There is no previous evidence of a global bibliometric analysis in the literature in English on themes of CCE. Therefore, the aim of this article was to carry out a bibliometric analysis from Scopus database of CCE for the period 2000–2023. Once obtained, two filtering steps for selection of documents consisting of a custom R script implementation and a careful reading of the remaining documents were applied. During the search, a dynamic approach that puts emphasis on the processes operating on rocky coasts was selected instead of an evolutionary geological perspective. The final list reached 583 documents. A second aim was to discuss the research trends and challenges based on the latest highly-cited documents. As main result, the trend of the scientific production in the theme of CCE had an increasing interest over the last years, with an average compound annual growth rate of 15.6%. On the other side, the results demonstrated that even though the USA took the second place, European countries (United Kingdom, Italy, France, Portugal, Spain and Poland) lead the ranking; therefore, there is a scarcity of knowledge about the theme in large regions such as South America and Africa where seacliffs are dominants.