This article presents analytical friction prediction models applicable to lubricants in point contacts under thermal elastohydrodynamic lubrication (TEHL). The types of models used consider the heat generated and its penetration into the bulk of the contacting solids. Therefore, the increase in temperature is determined, which causes important variations in the operating conditions. The article sets out the hypotheses assumed, the theoretical calculation procedures and the ensuing equations for determining the friction coefficient under TEHL. An experimental stage is performed on a mini-traction-machine, which allows the measurement of friction coefficient in ball–disc contacts under a wide range of control parameters involved in TEHL, such as lubricant bath temperature, load, average velocity, slide-to-roll ratio, and contacting materials. The experimental results for different lubricants are compared to those given by the models, and show the proposed models to be accurate for predicting the friction coefficient.

This paper presents the development of an analytical model for the prediction of the friction coefficient in line contacts under thermal elastohydrodynamic lubrication (TEHL). A new theoretical equation is deduced for determining the friction coefficient, taking into account the rheology of common lubricants under TEHL. This approach also considers the heat generated and its penetration into the bulk of the contacting solids. Therefore, the increase in temperature and ensuing variations in the operating conditions are determined.In order to illustrate the use of the new model and verify its accuracy, an experimental stage is performed in a tribological test rig. The predictions of the proposed model are compared with the results obtained in the test rig and other data reported in the literature for diverse lubricants, showing a good agreement in every case. © 2015 The Authors Lubrication Science published by John Wiley & Sons Ltd.