This work studied the reaction of common pollutants on a catalytic surface under oxidizing conditions. CO and naphthalene were used to reduce NO in the presence of oxygen during the transient heating of metal oxide nanoparticles. The latter consisted of a core–shell SmCeO2@TiO2 support with a TiO2 core and a samarium-stabilized CeO2 shell, impregnated with copper and potassium. The addition of potassium simulated the gradual accumulation of an alkali metal during biomass combustion, which can poison the catalyst. The Cu/SmCeO2@TiO2 catalyst achieved the complete conversions of NO, CO and naphthalene at 225, 236 and 255 °C, respectively. Even though the inclusion of potassium had the expected negative effect, the K/Cu/SmCeO2@TiO2 catalyst was still able to fully convert NO and CO at 323 and 299 °C, respectively, whereas a maximum naphthalene conversion of only 66% was obtained at 350 °C.
The effect of the ZrO2 loading was studied on spherical SiO2@ZrO2-CaO structures synthetized by a simple route that combines the Stöber and sol-gel methods. The texture of these materials was determined using SBET by N2 adsorption, where the increment in SiO2 spheres’ surface areas was reached with the incorporation of ZrO2. Combined the characterization techniques of using different alcoholic dissolutions of zirconium (VI) butoxide 0.04 M, 0.06 M, and 0.08 M, we obtained SiO2@ZrO2 materials with 5.7, 20.2, and 25.2 wt % of Zr. Transmission electron microscopy (TEM) analysis also uncovered the shape and reproducibility of the SiO2 spheres. The presence of Zr and Ca in the core–shell was also determined by TEM. X-ray diffraction (XRD) profiles showed that the c-ZrO2 phase changed in to m-ZrO2 by incorporating calcium, which was confirmed by Raman spectroscopy. The purity of the SiO2 spheres, as well as the presence of Zr and Ca in the core–shell, was assessed by the Fourier transform infrared (FTIR) method. CO2 temperature programmed desorption (TPD-CO2) measurements confirmed the increment in the amount of the basic sites and strength of these basic sites due to calcium incorporation. The catalyst reuse in FAME production from canola oil transesterification allowed confirmation that these calcium core@shell catalysts turn out to be actives and stables for this reaction.
CuO–CeO 2 /SiO 2 catalysts with Ce loading of 24% and above keep high activity after calcination at 700 °C. Therefore, a catalyst with high thermal stability of CuO–CeO 2 interface can be obtained able to work in a higher range of temperatures.
The pollution from industrial processes based on biomass combustion is still an ongoing problem. In the present contribution, the selective catalytic reduction of NO with CO and naphthalene is carried out in the presence of 10% oxygen. The accumulation of alkaline and alkaline earth metals during biomass combustion is here simulated by the addition of calcium to a Cu-impregnated YCeO2–TiO2 support. The results show that a high dispersion of copper is obtained, which is resistant to the accumulation of calcium. Full conversion of CO and naphthalene is achieved above 200 °C, whereas NO conversions of 80, 90, and 87% are obtained for the catalysts with Ca loadings of 2.6, 5.2, and 13%, respectively, at 350 °C. It is proposed that the high activity of the catalysts is ascribed to the formation of Cu–Ox–Ce species and that the accumulation of Ca acts as a barrier to avoid copper sintering. It was found that different forms of carbonate and nitrite/nitrate species form during reaction, coexisting as adsorbed species during the SCR reaction. The selectivity to N2 was almost 100% in all cases, due to the small presence of NO2 in the reactor outlet (no N2O was detected in any conditions).