Biosorption is an alternative procedure to remove metal ions from aqueous media using agricultural waste. In this work, the adsorption capacity and removal efficiency of agave bagasse (AB) toward Pb(II), Cd(II), and Zn(II) were analyzed. Parameters such as equilibrium pH, particle size, AB dosage, time, and initial metal ion concentration were discussed. The results showed that pH 5.5, 0.4 g (<250 μm), and only 15 min of contact assured conditions for maximum adsorption capacity. The kinetic studies were fitted to the pseudo-second-order model, whereas the isotherms showed good agreement with the Langmuir model. AB has a higher affinity for Pb(II) over Cd(II) and Zn(II), and the maximum adsorption capacities were 93.14, 28.50, and 24.66 mg g^–1, respectively. The results of the characterization evidenced two adsorption mechanisms. Scanning electron microscopy and X-ray diffraction displayed adsorption via the ion exchange mechanism by releasing Ca(II). The ¹³C cross-polarization mode with magic-angle spinning nuclear magnetic resonance analysis demonstrated a complexation mechanism by cellulose, hemicellulose, and lignin groups with Pb(II) and Cd(II), whereas the complexation is mainly observed by cellulose groups for Zn(II). AB is a good alternative for the removal of metals without prior thermal or chemical treatment, with rapid kinetics, suitable adsorption capacity, and high removal efficiency contributing to waste management.

In this paper, a combined precipitation–flotation system is proposed for the removal of Fe(III), Zn(II), and Cd(II) as hydroxides. The efficiency of precipitation, as a function of pH, metal ion concentration, and dosage of the precipitating agent as the main variables, was evaluated. The results showed that 99% efficiency was attained from a mixture solution containing the three metal ions in sulfate media at pH 10.3 after 15 min of treatment. The sedimentation behavior showed that a larger precipitate facilitated solid/liquid separation at 30 min. The characterization of precipitates was performed by X-ray diffraction (XRD) identifying iron, zinc, and cadmium oxides; hydroxides; and sodium sulfate. For the flotation, a 20 mg/L solution of dodecylamine (DDA) was used as a collector. Such a solution allowed for the removal of 76% of precipitates in concentrate. An increase in the collector concentration diminished the float percentage due to the micelle formation and low adsorption of the collector on the surface of the precipitate. The results provide evidence of the effectivity of the removal of metal ions by the combined precipitation–flotation system as an alternative for the treatment of acid mine drainage (AMD) in less time in comparison with a sedimentation stage.

La extracción de especies por sistemas acuosos bifásicos (ATPS) ha sido de gran relevancia en los últimos años debido a que son de fácil operación y que no provocan daños en el medio ambiente. No obstante, al formarse por dos fases ricas en agua representan una gran complejidad para comprender los mecanismos de extracción. Así, este trabajo se enfoca en la evaluación del comportamiento de extracción de HNO3 en un sistema ATPS formado por 20% p/p Na2SO4 y 35% p/p PEG-1000. Se evaluó la estabilidad de las ATPS a diferentes concentraciones de HNO3 y se determinó el porcentaje de extracción y el coeficiente de distribución de H+ y NO3- de la fase acuosa a la fase polímero a partir de los cuales se propuso un esquema de extracción.