The article is devoted to the problem of an automatic regulation of the active and reactive power flows in a medium voltage (MV) distribution network (6-20 kV). The design of the (MV) Power Flow Control Device (PFCD) has been developed and it implements a method for the vector control of network parameters. To test the adequacy of the theoretical propositions a Simulink model of a 6 kV distribution network with MV PFCD has been developed. Studies of the adjustment characteristics (voltages and currents) of MV PFCD semiconductor converters on the basis of the simulation model have been carried out. The analysis of the adjustment characteristics allows determining the phase and amplitude control laws for the voltage vector of the MV PFCD converters for the automatic control of the active and reactive power flows in the MV network.
The application of Smart Grid technology and devices in medium voltage distribution networks allows to solve the problem of low quality electric energy for consumers. One of such devices is a thyristor-regulated booster transformer (TRBT). This is an innovative smart device with thyristor control, which is characterized by a high-speed operation and provides voltage regulation in the 6-10 kV electric network. The article is devoted to the study of TRBT regulation characteristics. The method of TRBT two-zone alternating regulation is proposed. The mathematical and simulation models of TRBT have been developed, and it has allowed to obtain and to study the regulation characteristics for the three main operating regimes of TRBT. Finally, the output voltage regulation limits have been defined and the TRBT control laws have been formed.
The paper describes an experimental model of a hybrid power source (HPS) on the basis of solid oxide fuel cells (SOFC) being developed by the authors. HPS includes generating system, power storage system, pairing system and an active-adaptive control system. Generation system includes a reformer and a modular electrochemical generator based on SOFC. The storage system consists of a capacitive storage (CS) and accumulation batteries (AB). Accumulation batteries are made of alkaline nickel-cadmium batteries with improved power characteristics. A converter of current distribution (CCD) makes the basis of HPS pairing system. The authors developed a schematic diagram of CCD with three DC/DC upconverters. To implement an active-adaptive control system an algorithm of HPS operation was developed. The investigation of currents redistribution modes was carried out on the HPS simulation computer model developed by the authors. The research made it possible to determine the mode of stabilization of generated power, providing maximum SOFC utilization ratio.
The article deals with the power flow control device (PFCD) development in the power distribution 6–20 kV networks. The PFCD prototype was used to make switching process experiments and stationary operating conditions tests at longitudinal, transversal and longitudinal-transversal voltage regulation. The research results confirmed the PFCD circuitry effectiveness.
Procedure of the strategic environmental assessment of the power installations operating on the basis of renewable energy sources (RES) was developed and described. This procedure takes into account not only the operational process of the power installation but also the whole life cycles: from the production and distribution of power resources for manufacturing of the power installations to the process of their recovery. Such an approach gives an opportunity to make a more comprehensive assessment of the influence of the power installations on environments and may be used during adaptation of the current regulations and development of new regulations for application of different types of unconventional power installations with due account of the ecological factor. Application of the procedure of the integrated environmental assessment in the context of mini-HPP (Hydro Power Plant); wind, solar, and biogas power installations; and traditional power installation operating natural gas was considered. Comparison of environmental influence revealed advantages of new energy technologies compared to traditional ones. It is shown that solar energy installations hardly pollute the environment during operation, but the negative influence of the mining operations and manufacturing and utilization of the materials used for solar modules is maximum. Biogas power installations are on the second place as concerns the impact on the environment due to the considerable mass of the biogas installation and gas reciprocating engine. The minimum impact on the environment is exerted by the mini-HPP. Consumption of material and energy resources for the production of the traditional power installation is less compared to power installations on RES; however, this factor incomparably increases when taking into account the fuel extraction and transfer. The greatest impact on the environment is exerted by the operational process of the traditional power installations.