Recent prediction on the heavy statistical correlation between the mechanical properties of fiber reinforced composite (FRP) raises new concerns on the accurate reliability evaluation of composite structures, but such statistical correlation still lacks experimental verification. In this work, an experimental methodology is proposed to determine the statistical correlation between mechanical properties of unidirectional FRP composite. A rectangular shaped carbon fiber reinforced plastic (CFRP) specimen with a circular hole is loaded by tension, and 3D digital image correlation (DIC) is employed to characterize the heterogeneous strain field around the hole. Virtual field method (VFM) is used to derive E₁₁, E₂₂, ν₁₂, and G₁₂ of specimens. Specimen configuration considering fiber angle and hole diameter is optimized to achieve accurate determination of correlation coefficients. Experimental results on the linear correlation coefficients between E₁₁, E₂₂, ν₁₂, and G₁₂ agree well with previous theoretical predictions.

A thermal-induced measurement error induced by thermal deformation of digital camera in photo mechanics methods that has the same magnitude of the error as that in the resistance strain measurement method reduces the accuracy of high-precision measurement substantially and must, therefore, be compensated. Starting from the underlying mechanism of a thermal-induced measurement error, we investigated the image error introduced by thermal behaviours of digital cameras widely used in photo mechanics. We experimentally determined the relationships between the thermal behaviours and temperature, derived the relationship between the image error and measurement error of photo mechanics methods, and eventually established a physical model to explain the underlying relationship between the thermal-induced measurement error and temperature. Furthermore, based on the investigation of the underlying mechanism, we introduced three types of temperature compensation methods for photo mechanics, namely the model compensation method, the preheating method, and the compensation specimen method. We experimentally demonstrated the feasibility of these compensation methods. The model compensation method only needs the data regarding the environmental temperature during operation of the digital camera to implement the correction of the measurement results and enhance the measurement accuracy of photo mechanics methods. The preheating method is suitable for indoor photo mechanics measurements wherein the environmental temperature is almost constant, which ensures that the appearance of thermal balance of the digital camera after a period of self-heating. The compensation specimen method reduces the effective resolution of the images and it also requires that the image error forms in the region of tested specimen are the same as that in the region of the compensation specimen.

In this study, the digital image correlation (DIC) method and acoustic emission (AE) technology were combined to study the evolution of rock deformation localization in detail. The second-order spatial–temporal subset DIC (STS-DIC) algorithm was proposed and used for measuring strongly heterogeneous deformation fields of red sandstone specimens under uniaxial compression. The evolution of the deformation field was analyzed with a focus on the deformation localization stage. The length and width of the deformation localization band (DLB) were measured, and the relationships between the relative sliding rate of the DLB, the relative opening rate of the DLB, and the AE counts were identified. Deformation localization was found to result from the rapid evolution of the strain concentration before the peak stress. The complete development of the DLB is an inducing factor for catastrophic rock failure, and the failure modes of the rock specimens were consistent with the final state of the DLB. A good correlation was identified between the AE counts and the relative displacement rate of the DLB, and the sliding rate was found to have a significant influence on the AE counts.

Digital cameras represented by industrial cameras are widely used as image acquisition sensors in the field of image-based mechanics measurement, and their thermal effect inevitably induces thermal-induced errors of the mechanics measurement. To deeply understand the errors, the research for digital camera’s thermal effect is necessary. This study systematically investigated the heat transfer processes and temperature characteristics of a working digital camera. Concretely, based on the temperature distribution of a typical working digital camera, the heat transfer of the working digital camera was investigated, and a model describing the temperature variation and distribution was presented and verified experimentally. With this model, the thermal equilibrium time and thermal equilibrium temperature of the camera system were calculated. Then, the influences of thermal parameters of digital camera and environmental temperature on the temperature characteristics of working digital camera were simulated and experimentally investigated. The theory analysis and experimental results demonstrate that the presented model can accurately describe the temperature characteristics and further calculate the thermal equilibrium state of working digital camera, all of which contribute to guiding mechanics measurement and thermal design based on such camera sensors.

Radial vortex-based spin torque nano-oscillators (RV-STNOs) have attracted extensive attention as potential nano microwave signal generators due to their advantages over other topological states, such as their higher oscillation, higher microwave power, and lower power consumption. However, the current driving the oscillation frequency of the STNOs must be limited in a small range of adjustment, which means less data transmission channels. In this paper, a new RV-STNO system is proposed with a multiferroic nanostructure, which consists of an ultrathin magnetic multilayer and a piezoelectric layer. Phase diagrams of oscillation frequency and amplitude with respect to piezostrain and current are obtained through micromagnetic simulation. The results show that the threshold current density of −4000-ppm compressive strain-assisted RV-STNOs is reduced from 2 × 10⁹ A/m² to 2 × 10⁸ A/m², showing one order of magnitude lower than that of conventional current-driven nano-oscillators. Meanwhile, the range of oscillation frequency adjustment is significantly enhanced, and there is an increased amplitude at the low oscillation point. Moreover, a promising digital binary frequency-shift key (BFSK) and binary amplitude-shift key (BASK) modulation technique is proposed under the combined action of current pulse and piezostrain pulse. They can transmit bit signals and show good modulation characteristics with a minimal transient state. These results provide a reference for developing the next generation of spintronic nano-oscillators with a wide frequency range and low power consumption, showing potential for future wireless communication applications.

Digital image correlation (DIC) is a popular photomechanics method for deformation measurement. The conventional subset-based DIC method obtains the displacement vectors at the subset centers, but cannot calculate the deformation on the specimen edges, which may contain very useful information because specimens usually have greater deformation on edges, especially on curved edges due to stress concentration. In this study, the capability of a mesh-based DIC method using 8-node quadrilateral elements (Q8-mesh-DIC) in boundary deformation measurement was investigated and highlighted for specimens with non-uniform deformation. The results were compared with those obtained by some conventional subset-based DIC methods, and the accuracy of the boundary deformation measurement was verified through simulated and real experiments. The Q8-mesh-DIC appears to be more suitable for the boundary deformation measurement of non-uniform deformation fields.