Bryan Pivovar

Bryan Pivovar


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 June 2019 in Annual Review of Chemical and Biomolecular Engineering
Verified
Journal Article
Closed access
KAKatherine E. Ayers
Katherine E. Ayers
NDNemanja Danilovic
Nemanja Danilovic
RORyan Ouimet
Ryan Ouimet
MCMarcelo Carmo
Marcelo Carmo
Bryan PivovarBryan Pivovar
Bryan Pivovar
MBMarius Bornstein
Marius Bornstein
Hydrogen is an important part of any discussion on sustainability and reduction in emissions across major energy sectors. In addition to being a feedstock and process gas for many industrial processes, hydrogen is emerging as a fuel alternative for transportation applications. Renewable sources of hydrogen are therefore required to increase in capacity. Low-temperature electrolysis of water is currently the most mature method for carbon-free hydrogen generation and is reaching relevant scales to impact the energy landscape. However, costs still need to be reduced to be economical with traditional hydrogen sources. Operating cost reductions are enabled by the recent availability of low-cost sources of renewable energy, and the potential exists for a large reduction in capital cost withmaterial and manufacturing optimization. This article focuses on the current status and development needs by component for the low-temperature electrolysis options.

13 August 2019
Verified
Report
Closed access
PDF file
AMAhmad T Mayyas
Ahmad T Mayyas
MRMark Ruth
Mark Ruth
Bryan PivovarBryan Pivovar
Bryan Pivovar
GBGuido Bender
Guido Bender
KWKeith B Wipke
Keith B Wipke
The U.S. Department of Energy's Office of Scientific and Technical Information

11 July 2019 in Nature Catalysis
Verified
Journal Article
Closed access
PDF file
Bryan PivovarBryan Pivovar
Bryan Pivovar


16 February 2024
Verified
Report
Open access
PDF file
ABAlex Badgett
Alex Badgett
JBJoe Brauch
Joe Brauch
ATAmogh Thatte
Amogh Thatte
RRRachel Rubin
Rachel Rubin
CSChristopher Skangos
Christopher Skangos
MRMark Ruth
Mark Ruth
Enabling rapid and extensive decarbonization within the electric power and industrial sectors is likely to require high levels of renewable energy deployment, supported by technologies that store and transform renewable electricity into other useful forms. Within hard to decarbonize sectors such as organic chemicals and heavy-duty transportation, the use of low-carbon intensity hydrogen as a fuel and chemical building block is emerging as a near-term alternative to reduce their fossil-fuel dependency. Water splitting electrolysis to produce hydrogen requires only water and electricity as inputs, eliminating the use of natural gas in steam methane reforming, which is the conventional hydrogen production pathway. When powered by low-carbon electricity, electrolysis represents an important pathway towards cross-sectoral decarbonization. Proton exchange membrane (PEM) electrolyzers are a near-term technology for hydrogen production that could integrate with future grids that have a high clean power penetration. As of 2023, the cost of hydrogen produced from PEM electrolyzers is higher than fossil-based production due to high costs of capital equipment and electricity. Previous work (Badgett, Ruth, and Pivovar 2022) has found that PEM electrolyzers that operate dispatchably at low capacity factors to take advantage of times of low-cost electricity can produce hydrogen at lower costs if the capital cost of these systems is low. This report presents a bottom-up manufactured cost analysis for a PEM electrolyzer stack and associated balance of plant (BOP) equipment. The electrolyzer design is intended to represent current state of the art (2022) stacks with respect to catalyst loadings (3 mg/cm2 total PGM loading) and material specifications. Near-term stack designs target significant reductions in loadings and the incorporation of advanced materials, to both reduce manufactured cost and increase efficiency. The cost reduction opportunities outlined in this analysis underscore the relevance of these advances and their potential impact on electrolyzer stack costs. For example, this analysis estimates manufactured costs for 1-MW electrolyzer systems of around $890/kW (2020 dollar year basis) at manufacturing rates of 10 MW/yr, with potential cost reductions to $540/kW possible with gigawatt scale manufacturing systems, not including manufacturer markup. This analysis focuses on pathways towards lowering the capital costs of PEM electrolyzers through avenues such as manufacturing economies of scale, advanced manufacturing techniques, and advanced system and materials engineering. Achieving manufacturing economies of scale requires high utilization rates of manufacturing lines, reducing the manufactured cost per component across components of the electrolyzer stack, while bulk purchasing and high manufacturing throughput decrease the cost of BOP subsystems. The combination could result in a total system manufactured cost reduction of approximately 50%. Opportunities exist for reducing the manufactured cost of stack and balance of plant equipment. Advanced stack manufacturing techniques such as slot die roll-to-roll production of the catalyst-coated membrane enable high throughput of these parts relative to slower batch coating production methods. System and material engineering can drive manufactured costs lower through reduced dependency on expensive materials such as iridium and platinum. Opportunities also exist for reducing the cost of BOP equipment through manufacturing economies of scale and potential cost reductions over time (e.g., learning). While any one of these strategies can yield reductions in the manufactured costs of PEM electrolyzers, achieving cost targets requires the incorporation of all these strategies (Figure ES-1c). We show that advances in stack design, reductions in catalyst loadings, and BOP cost improvements at higher manufacturing rates could yield significant reductions in the cost of manufacturing a PEM electrolyzer. There are important connections between system design, manufacturing methods, and electrolyzer performance; achieving cost reductions requires consideration of the interplay between these factors.

7 August 2014 in Catalysis Science & Technology
Verified
Journal Article
Closed access
PDF file
SAS. M. Alia
S. M. Alia
YYY. S. Yan
Y. S. Yan
Bryan PivovarBryan Pivovar
Bryan Pivovar
Spontaneous galvanic displacement has been utilized in the development of novel electrocatalysts.