The synthesis of styrene carbonate (SC) from styrene oxide (SO) and CO2 has been studied with various catalyst systems including metal halides and ionic liquids. The total conversion of SO and the selectivity for SC strongly depend on the catalyst systems used. The highest SC yield of 93% can be achieved at a low temperature of 80 °C for 1 h with a catalyst system of ZnBr2 and [C4-mim]Cl at a molar ratio of 1 ∶ 2. A CO2 pressure of 4 MPa is optimal but elevated pressures have no positive effects on this SC synthesis.
This paper reports the effect of various reaction variables on the activity and selectivity performance on a two-step synthesis of dimethyl carbonate (DMC) and glycol from propylene oxide, carbon dioxide and methanol using a heterogeneous Mg containing smectite catalyst. The first step, the reaction of propylene oxide with CO2 to form propylene carbonate, and the second step, the transesterification reaction of the cyclic carbonate such as ethylene carbonate with methanol to DMC and ethylene glycol, have been studied. The catalyst was found to be effective for one-pot synthesis of DMC, i.e. the sequential reaction of the epoxide, CO2 and methanol.
Two-step synthesis of dimethyl carbonate (DMC) from urea has been investigated with various solid catalysts. The first step involves reaction of urea with ethylene glycol (EG) to form ethylene carbonate (EC) and the second step transesterification of EC formed with methanol to give DMC and EG. It has been found that ZnO is highly active and selective for the two steps, of which the former should be conducted under reduced pressure. At around ambient pressure, 2-oxazolidone and ethyleneurea are formed in the first step. Similar to EG, other glycols such as 1,2- and 1,3-propanediols can also be transformed to corresponding cyclic carbonates.
The synthesis of dimethyl carbonate (DMC) from methanol and CO2 was studied in the presence of methyl iodide and various base catalysts. Among the catalysts used, potassium carbonate was found to be most active. Dimethyl ether (DME) is formed as a byproduct. When the reaction was carried out at various pressure of CO2, two maxima in DMC formation were observed at 4.5 and 8 MPa, while DME formation decreased monotonically with increasing the CO2 pressure. The effects of the amounts of methyl iodide and potassium carbonate on the DMC and DME formation were also investigated. Mechanistic studies suggest that DMC and DME are produced in parallel pathways and methyl iodide is involved in the formation of both DMC and DME. Other alcohols show less reactivity than methanol.