As a sound transmitting device that relies on the nonlinearity of a medium, a parametric array (PA) can generate high-directivity low-frequency signals using a small aperture transducer and high-frequency signals. Despite their relatively low source level, the PA is frequently used to measure the acoustic properties of materials in low-frequency regions owing to their high directivity in confined acoustic water tanks. Therefore, methods for improving the source level of secondary signals are of interest. Currently, there are two driving methods for PA: the dual-frequency PA and the broadband PA with amplitude modulation. In this study, we share the results of an elaborate and comparative experimental investigation of these two driving methods. Comparisons are made and discussed in terms of the intensity of the generated secondary signal and its characteristics in the frequency domain. Based on these factors, we confirmed that the broadband PA was more suitable as the sound source of the low-frequency characteristic measurement system of acoustic materials.

Beam pattern measurement is essential to verifying the performance of an array sonar. However, common problems in beam pattern measurement of arrays include constraints on achieving the far-field condition and reaching plane waves mainly due to limited measurement space as in acoustic water tank. For this purpose, the conventional method of measuring beam patterns in limited spaces, which transform near-field measurement data into far-field results, is used. However, the conventional method is time-consuming because of the dense spatial sampling. Hence, we devised a method to measure the beam pattern of a discrete line array in limited space based on the subarray method. In this method, a discrete line array with a measurement space that does not satisfy the far-field condition is divided into several subarrays, and the beam pattern of the line array can then be determined from the subarray measurements by the spatial convolution that is equivalent to the multiplication of beam pattern. The proposed method was verified through simulation and experimental measurement on a line array with 256 elements of 16 subarrays.