This paper presents the optimal design and experimental prototype testing of a low-cost motor applied for a city battery electric vehicle (BEV), zero emission A-segment. Respecting the car performance specifications, the aluminum cage rotor induction machine (IM) is designed to reduce motor cost using totally enclosed fan-cooled (TEFC) technology and a commercial speed encoder of internal combustion engine (ICE). An optimization approach and finite elements analysis (FEA) validation are coupled with thermal calculations and used to size the thermo-electromagnetic parts of the machine. The prototype is manufactured with full instrumentation. During the experiments, an indirect flux-oriented control model is built based on simulations in Matlab/Simulink environment. Using this real time control platform, the motor control is calibrated on the prototype in test-bench, to ensure the optimum energy consumption and the current and speed regulations in the entire large operating range. Finally, the experimental prototype testing results are shared to show the ideal design solution in term of peak performances, efficiency, thermal and NVH behaviors.
This paper presents an efficient method of estimation of rotor cage temperature for induction machine design, applied for electric and hybrid vehicles. This factor influences the torque produced by the induction machine with a field-oriented control algorithm. Equipping sensors to measure the temperature of a rotation component is expensive and is not representative of mass production. The approach of estimation of rotor cage temperature is based on the good knowledge of motor parameters and the estimation of the flux of the machine. For an accuracy inductance taking account of the saturation, the no-load test can be performed. The machine flux will be estimated taking account of the voltage drop of the system on the test-bench. The rapid prototyping in a real-time motor control platform will be presented that integrates this estimator of rotor temperature. We finally show the experimental testing results compared to the measurement of the rotor cage on a prototype asynchronous low-cost motor designing for battery electric city cars.
1 January 2018 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
PurposeThis paper aims to propose a multiobjective branch and bound (MOBB) algorithm with a new criteria for the branching and discarding of nodes based on Pareto dominance and contribution metric. Design/methodology/approachA multiobjective branch and bound (MOBB) method is presented and applied to the bi-objective combinatorial optimization of a safety transformer. A comparison with exhaustive enumeration and non-dominated sorting genetic algorithm (NSGA2) confirms the solutions. FindingsIt appears that MOBB and NSGA2 are both sensitive to their control parameters. The parameters for the MOBB algorithm are the number of starting points and the number of solutions on the relaxed Pareto front. The parameters of NSGA2 are the population size and the number of generations. Originality/valueThe comparison with exhaustive enumeration confirms that the proposed algorithm is able to find the complete set of non-dominated solutions in about 235 times fewer evaluations. As this last method is exact, its confidence level is higher.