This paper presents a wearable rectenna array fabricated using Cordura textile material for harvesting low-power radio frequency (RF) energy. The dielectric properties of the textile were thoroughly investigated for circuit and antenna design. The rectenna element comprises a linearly polarized patch antenna and a single-stage full-wave Greinacher rectifier. The proposed stack topology helps reduce the size of the elements in the rectenna array. An RF choke is added to the array to prevent impedance mismatch due to changes in load impedance, and a foam with a shielding ground is inserted between the rectifier circuit and the human body to eliminate the body-proximity effect. A maximum output voltage of 1.05 V is achieved when the 2 × 2 rectenna array attached to a human body and 150 cm from the indoor Wi-Fi access point whose output power is 20 dBm and the antenna gain is 5 dBi.
13 May 2009 in Microwave and Optical Technology Letters
This paper presents the systematic design, fabrication, and experimental validation of a compact quad-port dielectric resonator antenna (DRA)–based MIMO system for sub-6 GHz 5G applications. An aperture-fed excitation combined with optimized spatial arrangement is employed to achieve high inter-port isolation intrinsically, without using additional parasitic decoupling networks or external isolation elements. Each radiating element supports dual-mode operation by exciting a fundamental linearly polarized TE 11 δ mode at 3.5 GHz and a higher-order TE 12 δ mode at 3.9 GHz, enabling dual-band performance. The proposed four-port MIMO antenna achieves inter-port isolation exceeding 20 dB at the operating frequencies of 3.5 GHz and 3.9 GHz within a compact footprint of 0.35λ₀ × 0.35λ₀. Experimental results demonstrate excellent diversity characteristics with ECC below 0.05, CCL of approximately 0.1 bps/Hz, peak gain up to 2.62 dBi, and radiation efficiency approaching 89%. The moderate gain level is well suited for compact user terminals, indoor access points, and small-cell 5G devices, where omnidirectional coverage and low correlation are prioritized over high directional gain. The close agreement between simulated and measured results confirms the robustness of the design, making it a promising candidate for compact sub-6 GHz 5G communication devices.
27 November 2024 in IET Microwaves, Antennas & Propagation
This paper presents a systematic antenna design methodology that integrates machine learning, leveraging the progressive growth technique of Progressive Growing of GANs (PGGAN) to generate images of various dual‐band PIFA‐like antenna structures. The process involves using data augmentation methods to generate 4180 antenna samples. In the latent space, the authors employ Latin Hypercube Sampling to maintain diversity and combine it with the Hough Transform to enhance the edge features of the antennas while providing labelling functionality. This labelling method strengthens the relationship between antenna frequency and wavelength characteristics. The paper clearly outlines the design process, starting from the simulation of two types of single‐frequency PIFA‐like antennas (2.45 and 5.2 GHz, respectively) to the completion of PGGAN's generation task, resulting in a novel dual‐band Wi‐Fi PIFA‐like antenna structure. The measurement results of the dual‐band antennas exhibit excellent consistency with the simulation results.
In this paper, artificial intelligence (AI) technology is applied to the electromagnetic imaging of anisotropic objects. Advances in magnetic anomaly sensing systems and electromagnetic imaging use electromagnetic principles to detect and characterize subsurface or hidden objects. We use measured multifrequency scattered fields to calculate the initial dielectric constant distribution of anisotropic objects through the backpropagation scheme (BPS). Later, the estimated multifrequency permittivity distribution is input to a convolutional neural network (CNN) for the adaptive moment estimation (ADAM) method to reconstruct a more accurate image. In the meantime, we also improve the definition of loss function in the CNN. Numerical results show that the improved loss function unifying the structural similarity index measure (SSIM) and root mean square error (RMSE) can effectively enhance image quality. In our simulation environment, noise interference is considered for both TE (transverse electric) and TM (transverse magnetic) waves to reconstruct anisotropic scatterers. Lastly, we conclude that multifrequency reconstructions are more stable and precise than single-frequency reconstructions.