This work evaluates the effect of incorporation of olive stone ash, as secondary raw material, on the properties of fired clay bricks. To this end, three compositions containing 10, 20, and 30 wt% olive stone ash in a mixture of clays (30 wt% red, 30 wt% yellow, and 40 wt% black clay) from Spain were prepared. The raw materials, clay and olive stone ash, were characterized by means of XRD, XRF, SEM-EDS, and TG-TDA analysis. The engineering properties of the press molded specimens fired at 900°C (4 h) such as linear shrinkage, bulk density, apparent porosity, water absorption, and compressive strength were evaluated. The results indicated that the incorporation of 10 wt% of olive stone ash produced bricks with suitable technological properties, with values of compressive strength of 41.9 MPa but with a reduced bulk density, by almost 4%. By contrast, the incorporation of 20 wt% and 30 wt% sharply increased the water absorption as a consequence of the large amount of open porosity and low mechanical strength presented by these formulations, which do not meet the standards for their use as face bricks. The bricks do not present environmental problems according to the leaching test.
1 December 2017 in Journal of Materials in Civil Engineering
The present study evaluates the suitability of several types of biomass bottom ashes [wood bottom ash (WBA), pine-olive pruning bottom ash (POPBA), olive stone bottom ash (OSBA), and olive pomace bottom ash (OPBA)] as an alternative source to replace ceramic raw material in the production of clay bricks. The clay and biomass bottom ash were characterized by means of X-ray diffraction (XRD) (crystallinity), X-ray fluorescence spectroscopy (XRF) (chemical composition), carbon, nitrogen, hydrogen, and sulphur (CNHS) (elemental chemical analysis), and particle-size distribution. The specimens were manufactured by mixing clay and 20 by weight (wt%) of biomass bottom ash, subsequently compacted and fired at 1,000°C. The fired samples were characterized to determine their technological properties. The results indicate that brick formulations containing biomass bottom ash decreased the bulk density of the control bricks. At the same time, they have suitable mechanical behavior. In addition, thermal properties of clay-biomass bottom ash are manifestly better than those of the clay control bricks. The heavy-metal concentration in the leaching test of the bottom ash-clay bricks establishes that the bricks do not present environmental problems.