In recent years, technological advances related with the so-called intelligent materials have been exploited for problem solving in many engineering fields. In this regard, shape memory alloys (SMA) seem suitable for medical and engineering applications and many others. These alloys have the ability to return to the original form after an apparently plastic deformation by applying heat and the also ability to perform phase changes with voltage variations under a specific temperature. These properties allow the development of a hysteretic loop with energy dissipation, which can be used as a damping element in a vibratory system. In this paper, a MATLAB algorithm was developed to create an interface with the Ansys® APDLTM software that simulate the dynamic behavior of a SMA. The software is capable to obtain the cyclical behavior of a vibratory mechanical system based on the energy dissipation properties of the SMA. The results show that the free vibration of a mass-damper (alloy) system presents the energy dissipation related in magnitude with the area of the hysteresis loop until the deformation caused by the motion which does not correspond to a voltage required to initiate the (direct) phase transformation of the material, thus reducing the displacement to a constant level. Keywords: SMA, ANSYS APDLTM, Matlab
This paper presents a characterization processes study of metallic alloys, more specifically the shape memory alloys (SMA) composed by Nickel and Titanium (NiTinol). Two different wire suppliers were studied, starting with metallographic analysis until observe the contours of the grain wires. Differential scanning calorimetry (DSC) test was also performed to obtain phase transformation temperatures of the NiTinol alloys. Finally, after several tensile tests, some results were obtained for stresses, strains, elasticity modules and maximum rupture deformation.