Two causes for the instability of traffic flow are investigated: the time lag caused by finite accelerations of vehicles and the delay caused by finite reaction times of drivers. Furthermore, the degree to which drivers may compensate for these delays is simulated by looking several vehicles ahead and anticipating future traffic situations. Since vehicular traffic flow is an extended multiparticle system with many degrees of freedom, two concepts of linear stability have to be considered: (a) local stability of a car following a leader that drives at constant velocity and (b) string (chain) stability of a platoon of several vehicles following each other. Typically, string stability is a much more restrictive criterion than local stability. Both types of stability are simulated with the human driver model of M. Treiber et al. [Physica A, Vol. 360, No. 1, 2006, pp. 71-88], which includes all the foregoing features. Several interesting results were found: (a) with a suitable anticipation, string stability for reaction times exceeding the safety time gap was obtained (to the authors' knowledge, this result had not yet been achieved for any other car-following model); (b) parameter changes that destabilize the model variant with zero reaction time may stabilize the model with finite reaction times, and vice versa; and (c) distributed reaction times (every driver has a different reaction time) can stabilize the system compared with the case of drivers with identical reaction times that are equal to the mean.
We propose a new methodology for calibrating Wiedemann-99 vehicle-following parameters for mixed traffic (different conventional vehicle classes) based on trajectory data. The existing acceleration equations of the Wiedemann model are modified to represent more realistic driving behavior. Exploratory analysis of simulation data revealed that different Wiedemann-99 model parameters could lead to similar macroscopic behavior, highlighting the importance of calibration at the microscopic level. Therefore, the proposed methodology is based on optimizing performance measures at the microscopic level (acceleration, speed, and trajectory profiles) to estimate suitable calibration parameters. Further, the goodness of fit for the observed data is sensitive to the numerical integration method used to compute vehicles’ velocity and position. We found that the calibrated parameters using the proposed methodology perform better than other approaches for calibrating mixed traffic. The results reveal that the calibrated parameter values and, consequently, the thresholds that delineate closing, following, emergency braking, and opening regimes, vary between two-wheelers and cars. The window (in the relative speed versus gap plot) for the unconscious following is larger for cars while the free-flow regime is more extensive for two-wheelers. Moreover, under the same relative speed and gap stimulus, two-wheelers and cars may be in different regimes and display different acceleration responses. Thus, accurate calibration of each vehicle’s parameters is essential for developing micro-simulation models for mixed traffic. The calibration analysis results of strict and overlapping staggered car following signify an impact of staggered car following compared with strict car following which demands separate calibration for strict and staggered following.
17 January 2024 in Transportation Research Part C: Emerging Technologies