The performance of the underwater optical wireless communication (UOWC) system is highly affected by seawater´s inherent optical properties and the solar radiation from sunlight, especially for a shallow environment. The multipath effect and degradations in signal-to-noise ratio (SNR) due to absorption, scattering, and ambient noises can significantly limit the viable communication range, which poses key challenges to its large-scale commercial applications. To this end, this paper proposes a unified model for underwater channel characterization and system performance analysis in the presence of solar noises utilizing a photon tracing algorithm. Besides, we developed a generic simulation platform with configurable parameters and self-defined scenarios via MATLAB. Based on this platform, a comprehensive investigation of underwater channel impairments was conducted including temporal and spatial dispersion, illumination distribution pattern, and statistical attenuation with various oceanic types. The impact of ambient noise at different operation depths on the bit error rate (BER) performance of the shallow UOWC system was evaluated under typical specifications. Simulation results revealed that the multipath dispersion is tied closely to the multiple scattering phenomenon. The delay spread and ambient noise effect can be mitigated by considering a narrow field of view (FOV) and it also enables the system to exhibit optimal performance on combining with a wide aperture.
In maritime communications, the ubiquitous Morse lamp on ships plays a significant role as one of the most common backups to radio or satellites just in case. Despite the advantages of its simplicity and efficiency, the requirement of trained operators proficient in Morse code and maintaining stable sending speed pose a key challenge to this traditional manual signaling manner. To overcome these problems, an automatic system is needed to provide a partial substitute for human effort. However, few works have focused on studying an automatic recognition scheme of maritime manually sent-like optical Morse signals. To this end, this paper makes the first attempt to design and implement a robust real-time automatic recognition prototype for onboard Morse lamps. A modified k-means clustering algorithm of machine learning is proposed to optimize the decision threshold and identify elements in Morse light signals. A systematic framework and detailed recognition algorithm procedure are presented. The feasibility of the proposed system is verified via experimental tests using a light-emitting diode (LED) array, self-designed receiver module, and microcontroller unit (MCU). Experimental results indicate that over 99% of real-time recognition accuracy is realized with a signal-to-noise ratio (SNR) greater than 5 dB, and the system can achieve good robustness under conditions with low SNR.