Detection of an environmental contaminant requires the use of expensive measurement equipment, which limits the realization of in situ tests because of their high cost, their limited portability, or the extended time duration of the tests. This paper presents in detail the development of a portable low-cost spectrophotometer which, by using a specialized chemosensor, allows detection of mercuric ions (Hg2+), providing effective and accurate results. Design specifications for all the stages assembling the spectrophotometer and the elements selected to build them are presented along with the process to synthesize the chemosensor and the tests developed to validate its performance in comparison with a high-precision commercial laboratory spectrophotometer.
This paper presents a simple method to generate low distorted sinusoidal references improving the power quality or the accuracy of power measurement in grid-synchronized applications. The proposed control strategy uses a half cycle detector, combining a square-wave discrete PLL with some functions embedded in a low-cost digital device. Using the proposed method it is possible to dedicate the digital device to perform the more difficult and complex numerical functions. The discrete PLL generates a low frequency (LF) signal with the same frequency and phase of the grid and a signal whose frequency is an integer number of times higher than the grid frequency (HF). Then, despite of the possible frequency variations, a constant number of samples-per-period is imposed in the control algorithms reducing deviations and errors. A descriptive study of the control loops provides the understanding to define the required controller parameters. The method is experimentally evaluated in a Sine-wave Pulse Width Modulated (SPWM) inverter, a grid-tied inverter and a monitoring system for a two-stage photovoltaic microinverter showing its simplicity and high applicability.
This paper presents the design and implementation of a low-cost spectrophotometer (LCSPM) for in-situ detection of mercury in water. The proposed device is composed of a white light emitting diode (LED), a diffraction grating (DG), a rotational positioning system, two photodiodes and a low-cost microcontroller. High-resolution angle displacement of DG allows obtaining a selective projection of the visible spectrum on the studied water and the reference during the same test. All required algorithms are embedded into the microcontroller allowing the transfer of the resulting data to a computer. The capability of the proposed LCSPM for detection of mercuric ions (Hg 2 +) in water was tested with the help of a synthesized coumarin and then validated by comparison with a standard device.