A homemade portable no-blind zone laser detection and ranging (lidar) system was designed to map the three-dimensional (3D) distribution of aerosols based on a dual-field-of-view (FOV) receiver system. This innovative lidar prototype has a space resolution of 7.5 m and a time resolution of 30 s. A blind zone of zero meters, and a transition zone of approximately 60 m were realized with careful optical alignments, and were rather meaningful to the lower atmosphere observation. With a scanning platform, the lidar system was used to locate the industrial pollution sources at ground level. The primary parameters of the transmitter, receivers, and detectors are described in this paper. Acquiring a whole return signal of this lidar system represents the key step to the retrieval of aerosol distribution with applying a linear joining method to the two FOV signals. The vertical profiles of aerosols were retrieved by the traditional Fernald method and verified by real-time observations. To effectively and reliably retrieve the horizontal distributions of aerosols, a composition of the Fernald method and the slope method were applied. In this way, a priori assumptions of even atmospheric conditions and the already-known reference point in the lidar equation were avoided. No-blind-zone vertical in-situ observation of aerosol illustrated a detailed evolution from almost 0 m to higher altitudes. No-blind-zone detection provided tiny structures of pollution distribution in lower atmosphere, which is closely related to human health. Horizontal field scanning experiments were also conducted in the Shandong Province. The results showed a high accuracy of aerosol mass movement by this lidar system. An effective quantitative way to locate pollution sources distribution was paved with the portable lidar system after validation by the mass concentration of suspended particulate matter from a ground air quality station.

Recently, in China, during the period of transition between spring and summer, the combination of sandstorms and ozone (O₃) pollution has posed a significant challenge to the strategy of coordinated control of fine particulate matters (PM_2.5) and O₃. On the one hand, the dust invasion brings many primary aerosols and causes a large range of transboundary transport. On the other hand, the high concentration of aerosol causes a severe disturbance to the distribution of O₃. Traditionally, high-resolution assessments of the spatial distribution of aerosols and O₃ can be carried out using LiDAR technology. However, the negligence of the influence of aerosols in the process of O₃ retrieval in traditional differential absorption lidar (DIAL) leads to an error in the accuracy of ozone concentration. Especially when dust transit occurs, the errors become bigger. In this study, a self-customized four-wavelength differential-absorption LiDAR system was used to synchronously obtain the accurate vertical distributions of ozone and high-concentration aerosol. The wavelength index of concentrated aerosol was inverted and applied to the differential equation framework for O₃ calculation. This novel approach to retrieving the vertical profile of O₃ was proposed and verified by applying it to a dust pollution event that occurred from April to May 2021 in Anyang City Henan Province, which is located in Northern China. It was found that the extinction coefficient of aerosol reached 2.5 km⁻¹ during the dust period, and O₃ was mainly distributed between 500 m and 1500 m. The O₃ error exceeded over 10% arising from the high-concentration aerosol below 1.5 km during the dust storm event. By employing the inversion algorithm while considering the aerosol effects, the ozone concentration error was improved by over 10% compared with the error recorded without considering the aerosol influence especially in dust events. Through this study, it was found that the algorithm could effectively realize the synchronous and accurate inversion of high-concentration aerosols and O₃ and can provide key technical support for air pollution control in China in the future.

This study investigates a typical ozone pollution episode in Hong Kong from May 29 to 31, 2023. Based on the observations of a Differential Absorption Lidar (DIAL) system, both ozone and aerosols accumulated below 1.5 km during the pollution episode. Ozone exhibited distinct formation and accumulation characteristics, with concentrations exceeding 200 μg m⁻³. Aerosols presented evident features of regional transport and local coupling, with extinction coefficients surpassing 1.1 km⁻¹. During late spring to early summer, the northward extension of the Western Pacific Subtropical High (WPSH) established favorable conditions for ozone production. This background was amplified by Typhoon Mawar, whose peripheral circulation channeled pollutants from the Pearl River Delta into Hong Kong through horizontal and vertical pathways, significantly worsening near-surface air quality. The episode was eventually mitigated, as enhanced vertical mixing facilitated the dispersion and removal of accumulated pollutants. These results highlight the critical role of meteorological–chemical interactions in shaping this ozone pollution episode.

The Marine Atmospheric Boundary Layer (MABL), as a critical component of Earth’s climate system, governs the exchange of matter and energy between the ocean surface and the lower atmosphere. This study presents shipborne Doppler lidar observations conducted during 12 January to 3 February 2024, along the southeastern Chinese coast. Employing a Coherent Doppler Wind Lidar (CDWL) system onboard the R/V “Yuezhanyu” research vessel, we investigated the spatiotemporal variability of MABL characteristics through integration with ERA5 reanalysis data. The key findings reveal a significant positive correlation between MABL height and surface sensible heat flux in winter, underscoring the dominant role of sensible heat flux in boundary layer development. Through the Empirical Orthogonal Function (EOF) analysis of the ERA5 regional boundary layer height, sensible heat flux, and sea level pressure, we demonstrate MABL height over the coastal seas typically exceeds the corresponding terrestrial atmospheric boundary layer height and exhibits weak diurnal variation. The CDWL observations highlight complex wind field dynamics influenced by synoptic conditions and maritime zones. Compared to onshore regions, the MABL over offshore areas further away from land has lower wind shear changes and a more uniform wind field. Notably, the terrain of Taiwan, China, induces significant low-level jet formations within the MABL. Low-level jets and low boundary layer height promote the pollution episode observed by CDWL. This research provides new insights into MABL dynamics over East Asian marginal seas, with implications for improving boundary layer parameterization in regional climate models and advancing our understanding of coastal meteorological processes.

Vertical profiles of aerosol’s extinction coefficients observed by lidar with a spatial resolution of 7.5m revealed different haze-layer structures of aerosol distribution in Wuxi city. With surface monitoring of PM₁₀, PM_2.5 and Black Carbon (BC) simultaneously, the vertical characteristics and mechanisms of pollution in lower troposphere in Hinterland of YRD region was studied with a profile-analysis method. Lidar was proved to be an effective tool for the further study of complex pollution in China.