A kriging-based metamodelling approach for analysing the structural reliability of a sheetpile wall in a dyke is formulated. This specific problem is characterised by high target reliabilities ( ) in combination with a noisy and incomplete numerical model response. Starting from the original formulation of active learning kriging-based Monte Carlo simulation (AK-MCS), a robust two-stage metamodel framework is formulated in combination with adaptive multiple importance sampling, Gaussian process classification and kernel enhancements. Learning functions and convergence criteria are revised to maintain consistency with the metamodel enhancements. The developed metamodel is applied in the reliability analysis of a soil-structure interaction problem involving a sheetpile wall in a dyke body, which is representative of a class of problems encountered in engineering practice. Low dimensional example studies demonstrate the workings of the model and give insight into the model response. Full probabilistic analyses are then performed to estimate the probabilities of structural failure in a reliability updating context. The results show that after several necessary enhancements of the classical formulations, metamodelling approaches can be used successfully in combination with noisy and incomplete computational models as are often encountered in geotechnical engineering practice.
Improbable slope failure is addressed in the framework of reliability analysis of slopes in heterogeneous cohesive soils, as the small subset of realisations that fail without additional measures to trigger failure. The mode of these slope failures, located at the weak tail of the reliability curve, is demonstrated to differ significantly from the deterministic solution as well as the stochastic average solution found when shear strength reduction is applied to trigger slope failure. Subset simulation is applied to compute the probability-dependent difference in failure mode for a range of slopes down to very low levels of probability, which is required to properly account for the actual failure in predominantly safe slopes. The results demonstrate possible differences in the mode of failure when properly accounting for the uncertainty in spatial variability in a full probabilistic slope stability analysis, and highlight that caution may be needed when using the strength reduction method.