Thermally reduced graphene oxide/carbon nanotube (rGO/CNT) composite films were successfully prepared by a high-temperature annealing process. Their microstructure, thermal conductivity and mechanical properties were systematically studied at different annealing temperatures. As the annealing temperature increased, more oxygen-containing functional groups were removed from the composite film, and the percentage of graphene continuously increased. When the annealing temperature increased from 1100 to 1400 °C, the thermal conductivity of the composite film also continuously increased from 673.9 to 1052.1 W m−1 K−1. Additionally, the Young’s modulus was reduced by 63.6%, and the tensile strength was increased by 81.7%. In addition, the introduction of carbon nanotubes provided through-plane thermal conduction pathways for the composite films, which was beneficial for the improvement of their through-plane thermal conductivity. Furthermore, CNTs apparently improved the mechanical properties of rGO/CNT composite films. Compared with the rGO film, 1 wt% CNTs reduced the Young’s modulus by 93.3% and increased the tensile strength of the rGO/CNT composite film by 60.3%, which could greatly improve its flexibility. Therefore, the rGO/CNT composite films show great potential for application as thermal interface materials (TIMs) due to their high in-plane thermal conductivity and good mechanical properties.
Vertically aligned carbon nanotube arrays (VACNTs) have many excellent properties and show great potential for various applications. Recently, there has been a desire to grow VACNTs on nonplanar surfaces and synthesize core-sheath-structured VACNT–inorganic hybrids. To achieve this aim, atomic layer deposition (ALD) has been extensively applied, especially due to its atomic-scale thickness controllability and excellent conformality of films on three-dimensional (3D) structures with high aspect ratios. In this paper, the ALD of catalyst thin films for the growth of VACNTs, such as Co3O4, Al2O3, and Fe2O3, was first mentioned. After that, the ALD of thin films for the synthesis of VACNT–inorganic hybrids was also discussed. To highlight the importance of these hybrids, their potential applications in supercapacitors, solar cells, fuel cells, and sensors have also been reviewed.