As an important energy storage device, lithium-ion batteries have vast applications in daily production and life. Therefore, the remaining useful life (RUL) prediction of such batteries is of great significance, which can maintain the efficacy and reliability of the system powered by lithium-ion batteries. For predicting remaining useful life of lithium-ion batteries accurately, an adaptive hybrid battery model and an improved particle filter (PF) are developed. First, the adaptive hybrid model is constructed, which is a combination of empirical model and long short-term memory (LSTM) neural network model such that it could characterize battery capacity degradation trend more effectively. In addition, the adaptive adjustment of the parameters for hybrid model is realized via optimization technique. Then, the beetle antennae search (BAS) based particle filter is applied to update the battery states offline constructed by the proposed adaptive hybrid model, which can improve the estimation accuracy. Finally, remaining useful life short-term prediction is realized online based on long short-term memory neural network rolling prediction combined historical capacity with online measurements and latest offline states and model parameters. The battery data set published by NASA is used to verify the effectiveness of proposed strategy. The experimental results indicate that the proposed adaptive hybrid model can well represent the battery degradation characteristics and have a higher accuracy compared with other models. The short-term remaining useful life prediction results have good performance with the errors of 1 cycle, 3 cycles, and 1 cycle, above results indicate proposed scheme has a good performance on short-term remaining useful life prediction.
A two-wheeled self-balancing robot (TWSBR), also widely known as a segway, achieves stability and mobility by dynamically controlling its two base-mounted wheels. While this design provides exceptional flexibility and maneuverability, it presents challenges in maintaining static equilibrium and effective braking, particularly on inclined surfaces. This paper proposes a two-wheeled composite self-balancing robot (TWCSBR) incorporating an additional reaction force mechanism to enhance the static stability of TWSBRs, as well as their walking stability and braking performance on unknow inclined surfaces. For robotic control, an adaptive control framework is developed in this paper to achieve real-time balance and motion control by dynamically adjusting the weight distribution between two balancing strategies. This paper completes the design and construction of the robotic system, followed by six experiments to evaluate the performance of TWCSBR. These experiments assess its static balance capability, robustness against impact loads, braking performance, stable climbing on slopes, adaptability to varying inclines, and ability to traverse complex terrains. The research findings demonstrate that the TWCSBR retains the advantages of high maneuverability and a small turning radius inherent to classic TWSBRs. Additionally, it exhibits enhanced static balance and emergency braking capabilities. Furthermore, the robot can stably traverse slopes up to 29° and adapt effectively to unknown inclines. These results lead to the conclusion that the proposed TWCSBR significantly enhances the robot's maneuverability and safety, thereby broadening the potential applications of two-wheeled robots in novel environments. In addition, this study can also be applied to bipedal wheel-legged robots.
17 September 2021 in IET Control Theory & Applications
A quasi‐differential type event‐triggered model predictive control (ET‐MPC) framework for continuous‐time linear systems with additional disturbances is constructed. Different from the existing ET‐MPC, the triggering condition of the proposed method is focused on the differences of the errors between the actual states and the best prediction sequence at two consecutive sampling moments. Its advantage is that the dynamic characteristics of state changes can be better considered, which will achieve a more effective balance between communication load and system control performance. Then, to deal with persistent disturbances, a time‐varying tightening robustness state constraint is utilized in this scheme, instead of conventional state constraints. Finally, the new ET‐MPC algorithm is designed based on the dual‐mode control framework, and its feasibility, the system closed‐loop stability, as well as avoidance of Zeno behaviour are rigorously verified. Simulations and comparisons are provided to demonstrate the algorithm effectiveness.
In this article, we propose a gradient-based event-driven model predictive control (GEMPC) algorithm with a state-dependent threshold for nonlinear systems with additive disturbances and input and state constraints. Firstly, a novel gradient-based event-driven strategy is constructed in the light of the error gradient between the optimal prediction of the state and the real one, which could ensure the Zeno-free property via a positive triggering interval. Subsequently, the novel triggering mechanism and the dual-mode control are combined to establish a GEMPC framework, to further reduce the computing burden and communication transmission especially when the computational resources are limited. Additionally, the feasibility of the GEMPC algorithm and the input-to-state practical stability (ISpS) property of the considered system have been strictly proved in theory. Finally, the simulation comparison results on control of a perturbed nonlinear system are utilized to show the validity of the GEMPC algorithm.
An analytical model predictive control (MPC) tuning method for multivariable first-order plus fractional dead time systems is presented in this paper. First, the decoupling condition of the closed-loop system is derived, based on which the considered multivariable MPC tuning problem is simplified to a pole placement problem. Given such a simplification, an analytical tuning method guaranteeing the closed-loop stability as well as pre-specified time-domain performance is developed. Finally, simulation examples are provided to show the effectiveness of the proposed method.