The lack and inefficiency of urban drainage systems, as well as extreme precipitation, can lead to system overloading and, therefore, an urban pluvial flood. The study brings insights into this phenomenon from the perspective of the statistical relationship between precipitation and flooding parameters. The paper investigates the possibility of predicting sewer overloading based on the characteristics of the upcoming rain event using the Storm Water Management Model (SWMM) and statistical methods. Additionally, it examines the influence of precipitation resolution on the model sensitivity regarding floods. The study is set in a small urban catchment in Dresden (Germany) with a separated stormwater sewer system (SWSS). The flood-event-based calibrated model runs with observed and designed heavy rain events of various sums, durations, and intensities. Afterward, the analysis focuses on precipitation and model overloading parameters (total flood volume, maximum flooding time and flow rate, and maximum nodal water depth) with pairwise correlation and multi-linear regression (MLR). The results indicate that it is possible to define a certain threshold (or range) for a few precipitation characteristics, which could lead to an urban flood, and fitting MLR can noticeably improve the predictability of the SWSS overloading parameters. The study concludes that design and observed rain events should be considered separately and that the resolution of the precipitation data (1/5/10 min) does not play a significant role in SWSS overloading.

Evaporation plays an important role in the water balance on a different spatial scale. However, its direct and indirect measurements are globally scarce and accurate estimations are a challenging task. Thus the correct process approximation in modelling of the terrestrial evaporation plays a crucial part. A physically based 1D lumped soil–plant–atmosphere model (BROOK90) is applied to study the role of parameter selection and meteorological input for modelled evaporation on the point scale. Then, with the integration of the model into global, regional and local frameworks, we made cross-combinations out of their parameterization and forcing schemes to show and analyse their roles in the estimations of the evaporation. Five sites with different land uses (grassland, cropland, deciduous broadleaf forest, two evergreen needleleaf forests) located in Saxony, Germany, were selected for the study. All tested combinations showed a good agreement with FLUXNET measurements (Kling–Gupta efficiency, KGE, values 0.35–0.80 for a daily scale). For most of the sites, the best results were found for the calibrated model with in situ meteorological input data, while the worst was observed for the global setup. The setups' performance in the vegetation period was much higher than for the winter period. Among the tested setups, the model parameterization showed higher spread in performance than meteorological forcings for fields and evergreen forests sites, while the opposite was noticed in deciduous forests. Analysis of the of evaporation components revealed that transpiration dominates (up to 65 %–75 %) in the vegetation period, while interception (in forests) and soil/snow evaporation (in fields) prevail in the winter months. Finally, it was found that different parameter sets impact model performance and redistribution of evaporation components throughout the whole year, while the influence of meteorological forcing was evident only in summer months.

The number of global open-source hydrometeorological datasets and models is large and growing. However, with a constantly growing demand for services and tools from stakeholders, not only in the water sector, we still lack simple solutions, which are easy to use for nonexperts. The new R package incorporates the BROOK90 hydrologic model and global open-source datasets used for parameterization and forcing. The aim is to estimate the vertical water fluxes within the soil–water–plant system of a single site or of a small catchment (<100 km²). This includes data scarce regions where no hydrometeorological measurements or reliable site characteristics can be obtained. The end-user only needs to provide a location and the desired period. The package automatically downloads the necessary datasets for elevation (Amazon Web Service Terrain Tiles), land cover (Copernicus: Land Cover 100 m), soil characteristics (ISRIC: SoilGrids250), and meteorological forcing (Copernicus: ERA5 reanalysis). Subsequently these datasets are processed, specific hydrotopes are created, and BROOK90 is applied. In a last step, the output data of all desired variables on a daily scale as well as time-series plots are stored. A first daily and monthly validation based on five catchments within various climate zones shows a decent representation of soil moisture, evapotranspiration, and runoff components. A considerably better performance is achieved for a monthly scale.

The forests of central Germany (Saxony, Saxony-Anhalt, and Thuringia) are vital components of the local ecosystems, the economy, and recreation. However, in recent years, these forests have faced significant challenges due to prolonged climate-change-induced droughts, causing water shortages, tree stress, and pest outbreaks. One of the key components of the forests' vitality and productivity is the availability of soil moisture. Given the anticipated increase in the frequency and severity of drought events, there is a growing demand for accurate and real-time soil moisture information. This underscores the need for development of an appropriate monitoring tool to make forest management strategies more effective. The article introduces an operational high-resolution soil moisture monitoring framework for the forests in central Germany. The key components of this system include the advanced LWF-BROOK90 1D water balance model, a large database of the National Federal Forest Inventory, high-resolution forest soil maps, real-time climate data from the German Meteorological Service, and a web information platform for the presentation of daily updated results. This system informs the public and empowers forest managers and other decision-makers to take targeted, local measures for sustainable forest management, aiding in both drought mitigation and long-term forest health in the face of climate change. The validation of the system using soil moisture measurements from 51 stations with various sensor depths (up to 100 cm) showed an overall good agreement (0.76 median Pearson correlation), which was found to be higher for deciduous rather than coniferous forests. Finally, the framework is discussed against the background of the main limitations of existing monitoring systems and how operational soil moisture measurements contribute to better interpretation of simulations.

The simulation of fast-reacting hydrological systems often requires sub-hourly precipitation data to develop appropriate climate adaptation strategies and tools, i.e. upgrading drainage systems and reducing flood risks. However, these sub-hourly data are typically not provided by measurements and atmospheric models, and many statistical disaggregation tools are applicable only up to an hourly resolution. Here, two different models for the disaggregation of precipitation data from a daily to sub-hourly scale are presented. The first one is a conditional disaggregation model based on first-order Markov chains and copulas (WayDown) that keeps the input daily precipitation sums consistent within disaggregated time series. The second one is an unconditional rain generation model based on a double Poisson process (LetItRain) that does not reproduce the input daily values but rather generates time series with consistent rainfall statistics. Both approaches aim to reproduce observed precipitation statistics over different timescales. The developed models were validated using 10 min radar data representing 10 climate stations in Germany and South Korea; thus, they cover various climate zones and precipitation systems. Various statistics were compared, including the mean, variance, autocorrelation, transition probabilities, and proportion of wet period. Additionally, extremes were examined, including the frequencies of different thresholds, extreme quantiles, and annual maxima. To account for the model uncertainties, 1000-year-equivalent ensembles were generated by both models for each study site. While both models successfully reproduced the observed statistics, WayDown was better (than LetItRain) at reproducing the ensemble median, showing strength with respect to precisely refining the coarse input data. In contrast, LetItRain produced rainfall with a greater ensemble variability, thereby capturing a variety of scenarios that may happen in reality. Both methods reproduced extremes in a similar manner: overestimation until a certain threshold of rainfall and underestimation thereafter. Finally, the models were applied to climate projection data. The change factors for various statistics and extremes were computed and compared between historical (radar) information and the climate projections at a daily and 10 min scale. Both methods showed similar results for the respective stations and Representative Concentration Pathway (RCP) scenarios. Several consistent trends, jointly confirmed by disaggregated and daily data, were found for the mean, variance, autocorrelation, and proportion of wet periods. Further, they presented similar behaviour with respect to annual maxima for the majority of the stations for both RCP scenarios in comparison to the daily scale (i.e. a similar systematic underestimation).

HIGHLIGHTS. The study evaluates the runoff component performance of the Global BROOK90 automatic framework for hydrological modeling.Discharge observations from