Understanding the basaltic aquifer system and seawater intrusion on the volcanic island of Jeju, Korea, has received significant attention over the years, and various methodologies have been suggested in the contributions. Nevertheless, it is still difficult to effectively characterize groundwater systems due to the long period of volcanic activity and the lithological variability of basalt. In this study, geophysical well logging in seawater intrusion monitoring boreholes detected a sudden decrease of electrical conductivity within the saltwater zone in the eastern part of Jeju Island. This anomalous condition cannot be explained by the Ghyben-Herzberg model, which has historically been considered as the basic groundwater model of Jeju Island. This paper focuses on fine-scale temporal and spatial variability of groundwater flow using electrical conductivity and temperature logs and borehole temperature monitoring by a thermal line sensor. On the basis of the results, we evaluate an alternative model to replace the traditional conceptual model in the eastern part of Jeju Island. It is revealed that the area consists of heterogeneous aquifer systems, and the behavior of freshwater and saltwater is understood by temperature monitoring over the entire depth of boreholes. Coastal aquifers flow through two or more independent channels with weak vertical connections. In addition, seawater intrusion does not occur continuously in the vertical direction from the bottom depth, but instead occurs through these multilayered aquifers. In particular, the multilayered aquifers that are responsible for flow pathway, as well as the freshwater–saltwater interface form mainly at lithological boundaries. Our preliminary conceptual model is expected to be improved and revised by various measurements of hydrodynamic parameters such as flowmeter or packer test.

Exploration Geophysics is published by CSIRO PUBLISHING on behalf of the Australian Society of Exploration Geophysicists. Papers published report the results of significant case histories and relevant original research in geophysics, with emphasis on the Australian and similar environments.

Understanding the physical flow mechanisms in aquifer systems is essential in effectively protecting groundwater resources and preserving subsurface environments from a wide range of contaminants. A conceptual model is a simplified representation of a groundwater system and gaining knowledge about the geological features and parameters controlling the flow and transport processes is a crucial first step towards properly constructing a site-scale conceptual model. In this study, we present a multi-step workflow that involves integrated borehole techniques to gain information concerning groundwater flow. Measurements from core-scale to field-scale enable us to better build a subsurface geological structure divided into the unconsolidated layer and the fractured bedrock. In addition, neutron logging and mercury injection capillary pressure techniques allow for the development of vertical porosity distribution in the alluvial layer. For fracture characterization, the fracture geometry is delineated using a series of borehole imaging techniques and single-hole tests to differentiate the individual permeable fractures from other hydraulically inactive fractures. Combining the hydraulic and geometric evaluations, the presence of large-scale connective fracture networks is identified. Our high-resolution three-dimensional (3D) site-scale conceptual model is expected to contribute to improving the reliability and availability of numerical groundwater models.

This paper describes the impacts of the M5.8(5.1) Gyeongju earthquakes on groundwater levels using data obtained from a unique coastal monitoring well. The monitoring strategy integrates conventional water level monitoring with periodic, continuous measurements of temperature and electrical conductivity (EC) within the water column of the well. Another important component of the monitoring system is a new instrument, the InterfacEGG, which is capable of dynamically tracking the freshwater‐saltwater interface. Although the system was set up to monitor seawater intrusion related to over‐pumping, as well as rainfall and tidal effects, it recorded impacts associated with a large earthquake and aftershocks approximately 241 km away. Seismic energies associated with the M5.8(5.1) Gyeongju earthquakes induced groundwater flows to the monitoring well through fractures and joints in the crystalline basement rocks. Temperature and EC logging data showed that the EC vertical profile declined from an average of approximately 5300 to 4800 μS/cm following the earthquakes. The temperature profile showed a trend toward lower temperatures as the depth increased, a feature not commonly observed in previous studies. Data from the InterfacEGG suggested that the rise in EC was not due to the saltwater intrusion, but from the tendency for brackish water entering the borehole to induce convective mixing at deeper depths as the seismic waves travel through the well‐aquifer system. The increase in groundwater levels was caused by pulse of colder, less brackish water flowing into the well because of the earthquake. This behavior reflects an enhancement in rock permeability by removing precipitates and colloidal particles from clogged fractures, which improve the hydraulic connection with a nearby unit with a higher hydraulic head. This study suggests there is value added with a more aggressive monitoring strategy.