The energy performance of buildings especially public buildings needs to be optimized together with environmental, social and cost performance, which can be achieved by the multiobjective optimization method. The traditional building performance simulation (BPS) based multiobjective optimization is time-consuming and inefficient. Practical projects of complex public building design usually involve many-objective optimization problems in which more than three objectives are considered. Using BPS based multiobjective optimization is not sufficient to solve this kind of design problem. This paper aims to propose an artificial neural network (ANN) based many-objective optimization design method, an architect-friendly integrated workflow has been implemented. The proposed method has been applied on a public library building in Changchun city of China to optimize its Energy Use Intensity (EUI), Spatial Daylight Autonomy (sDA), Useful Daylight Illuminance (UDI) and Building Envelope Cost (BEC). The optimization process has obtained 176 non-dominated solutions. By adopting the selected relative optimal solutions, 1.6×105–2.1×105 kWh energy can be saved per year; sDA value and UDI value can be increased by 8.1%–11.0% and 4.3%–4.7% respectively; BEC can be reduced by ¥1.2×105–2.1×105 ($1.7×104–3.0×104). The optimization time has been greatly shortened in this method and the whole process is highly efficient without manual data conversion between different platforms.
This paper investigates outdoor thermal comfort in summer in commercial pedestrian streets in Harbin, using meteorological measurements and questionnaire surveys (1013 valid questionnaires). The results demonstrate that: (1) Thermal sensation has a lower range in an outdoor environment with smaller sky view factor (SVF) and less fluctuation, while the thermal sensation vote (TSV) range is more dispersed in an outdoor environment with larger SVF and more fluctuation; (2) In the urban, high-density commercial districts in Harbin, the air temperature and solar radiation have a greater influence on outdoor thermal sensation, while wind speed has less of an influence, and residents in areas with less fluctuations are more sensitive to air temperature and solar radiation; (3) The universal thermal climate index (UTCI) can accurately evaluate outdoor thermal comfort in Harbin in summer, with a neutral UTCI value of 19.3 °C and a range from 15.6 to 23.0 °C; (4) The actual acceptable thermal range is 16.8–29.3 °C, and this takes into account the psychological adaptation of the residents, which provides a more practical reference value; (5) With reference to the psychological adaptation, the outdoor thermal sensation of residents in early summer is about 0.5 TSV higher than that in late summer. These results provide a theoretical basis and a technical reference for the design of commercial pedestrian streets in severe cold regions.