The anomalous Nernst effect (ANE), one of the thermomagnetic effects studied for a long time, has recently attracted renewed attention. The ANE, which originates from fictitious fields in momentum space, is essential for clarifying the interplay among heat, spin, and charge in magnets. Moreover, compared to the Seebeck effect, it has various benefits for application to high-efficiency energy-harvesting devices as it may provide much more simple lateral structure, higher flexibility, and much lower production cost. In this review, we discuss various topics related to the methods to modulate the ANE for its thermoelectric applications. In addition, we review strategies to design materials to obtain large ANE including Weyl magnets and thermoelectric devices for effectively utilizing the ANE. Graphical Abstract
Material dependence of the anomalous Nernst effect (ANE) in perpendicularly magnetized ordered-alloy thin films is systematically investigated. The ANE was found to have a tendency to increase simply as uniaxial magnetic anisotropy increased at room temperature. The ANE increases as temperature increases from 10 to 300 K for all the materials. However, the signs of the ANE in Fe-based ordered-alloys (L10-FePt and L10-FePd) and in a Co/Ni multilayer are opposite to those in Mn-based ordered-alloys (L10-MnGa and D022-Mn2Ga). Ordered-alloys with larger uniaxial magnetic anisotropies reveal larger ANE and might be desirable for thermoelectric applications.
A Cu(001) layer was fabricated on a Au(001) layer to investigate the use of Cu as a buffer layer for growing L10-FeNi thin films. The epitaxial growth of a Cu buffer layer was observed using reflection high-energy electron diffraction. The flatness of the layer improved drastically with an increase in the substrate temperature although the layer was an alloy (AuCu3). An FeNi thin film was epitaxially grown on the AuCu3 buffer layer by alternate monatomic layer deposition and the formation of an L10-FeNi ordered alloy was expected. The AuCu3 buffer layer is thus a promising candidate material for the growth of L10-FeNi thin films.
L10-orderd FeNi alloy films with a high degree of order (S) and a large uniaxial magnetic anisotropy energy (Ku) were realized by denitriding FeNiN films. FeNiN films with the a-axis perpendicular to the film plane were epitaxially grown on SrTiO3 (001) substrates by molecular beam epitaxy by changing the growth temperatures (TS) to 200, 250, and 350 °C. The a-axis oriented epitaxial L10-FeNi films were fabricated by annealing the FeNiN films in a H2 gas atmosphere at 300 °C. S and Ku of the denitrided L10-FeNi films were characterized by anomalous x-ray diffraction using synchrotron radiation and magnetic torque measurements, respectively. A high S of 0.87 and a Ku of 5.9 × 105 J/m3 were realized in the L10-FeNi film with a TS of 350 °C. This high S value exceeds the values reported on L10-FeNi to date, but the Ku value was comparable to those of c-axis oriented L10-FeNi films with S ∼ 0.5 grown by alternate monoatomic deposition of Fe and Ni layers. A possible origin for the suppressed macroscopic Ku in a-axis oriented L10-FeNi films is discussed, and denitriding FeNiN is a promising method for the fabrication of L10-FeNi with a high S and a large Ku.
The anomaly in the anomalous Nernst effect (ANE) was observed for a C 1 b -type NiMnSb half-Heusler alloy thin film deposited on a MgO (001) substrate. The Nernst angle ( θANE ) showed maximum peak with decreasing temperature and reached 0.15 at 80 K, which is considered to be brought about by the cross-over from half-metal to normal ferromagnet in NiMnSb at low temperature. This anomaly was also observed for the transport properties, that is, both the resistivity and the anomalous Hall resistivity in the same temperature range.