A novel highly sensitive porous core-photonic crystal fiber (PC-PCF) has been designed and analysed for detection of chemical analytes in the terahertz frequency range. The PC-PCF is designed using rectangular structured air holes in the core with a kagome structured cladding. The full vectorial finite element method (FEM) is used to tune the geometrical parameters and to characterize the fiber. Our results demonstrate a high relative chemical sensitivity with significantly lower confinement loss for different analytes. Moreover, the PCF shows near zero dispersion variation, high modal effective area, high birefringence and high numerical aperture (NA). The practical realization of the fiber is feasible with present fabrication techniques. Our optimized PCF has commercial applications in chemical sensing as well as applications in terahertz systems that require guided polarization preserving transmission.
Ethanol is widely used in chemical industrial processes as well as in the food and beverage industry. Therefore, methods of detecting alcohol must be accurate, precise, and reliable. In this content, a novel Zeonex-based photonic crystal fiber (PCF) has been modeled and analyzed for ethanol detection in terahertz frequency range. A finite-element-method-based simulation of the PCF sensor shows a high relative sensitivity of 68.87% with negligible confinement loss of at 1 THz frequency and -polarization mode. Moreover, the core power fraction, birefringence, effective material loss, dispersion, and numerical aperture are also determined in the terahertz frequency range. Owing to the simple fiber structure, existing fabrication methods are feasible. With the outstanding waveguiding properties, the proposed sensor can potentially be used in ethanol detection, as well as polarization-preserving applications of terahertz waves.
We propose and numerically characterize the optical characteristics of a novel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor in the visible to near infrared (500–2000 nm) region for refractive index (RI) sensing. The finite element method (FEM) is used to design and study the influence of different geometric parameters on the sensing performance of the sensor. The chemically stable plasmonic material gold (Au) is used to produce excitation between the core and plasmonic mode. On a pure silica (SiO2) substrate, a rectangular structured core is used to facilitate the coupling strength between the core and the surface plasmon polariton (SPP) mode and thus improves the sensing performance. By tuning the geometric parameters, simulation results show a maximum wavelength sensitivity of 58000 nm/RIU (Refractive Index Unit) for the x polarization and 62000 nm/RIU for the y polarization for analyte refractive indices ranging from 1.33 to 1.43. Moreover, we characterize the amplitude sensitivity of the sensor that shows a maximum sensitivity of 1415 RIU−1 and 1293 RIU−1 for the x and y polarizations, respectively. To our knowledge, this is the highest sensitivity for an SPR in published literature, and facilitates future development of sensors for accurate and precise analyte measurement. The sensor also attains a maximum figure of merit (FOM) of 1140 and fine RI resolution of 1.6 × 10−6. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.
T-ray wavelengths are long enough to pass through dry, nonpolar objects opaque at visible wavelengths, but short enough to be manipulated by optical components to form an image. Sensing in this band potentially provides advantages in a number of areas of interest to security and defense such as screening of personnel for hidden objects and the retection of chemical and biological agents. Several private companies are developing smaller, reliable cheaper systems allowing for commercialization and this motivates us to review a number of promising applications within this paper. While there are a number of challenges to be overcome there is little doubt that T-ray technology will play a significant role in the near future for advancement of security, public health, and defense.
AA terahertz sensor based on a hollow core photonic crystal fiber (HC-PCF) has been proposed in this paper for chemical analyte detection in the terahertz frequency range. The Zeonex based asymmetrical hollow core is filled with an analyte and surrounded by a number of asymmetrical rectangular air holes bounded by a perfectly matched layer (PML) with absorbing boundary conditions. The performance of the proposed sensor is numerically investigated by using finite element method (FEM) based COMSOL software. It is found that a hollow core provides a high relative sensitivity as well as low transmission loss. Moreover, simplicity in design facilitates manufacturability and making it practical for a number of different biological and industrial applications.