Ships are significant emissions sources, especially in port areas. Besides other emission sources, they have remarkable air pollution impacts on residential areas near ports. It is well known that these emissions have deleterious impacts on both human health, and ecosystems. The biggest ports are generally located near highly populated cities. Therefore, emissions occurred due to shipping activities in ports have a significant importance. This study examines shipping emissions at berth by using data of ships calling in Iskenderun Port in 2013 and compares the environmental performance of using shore side electricity. The study also investigates the external costs associated with the impacts of emissions on climate change, air quality, and human health. According to the results, utilization of shore side electricity instead of auxiliary engines in ports provide significant benefits on environmental and economic issues. In case of Iskenderun Port, it is concluded that shore side electricity eliminates approximately $ 23 million of external costs per year.
6 February 2024 in Electric Power Components and Systems
En tr In this study, a new adaptive gain, decoupled surface sliding mode control technique is proposed for a real inverted pendulum system. Thus a robust control structure against unmodeled and uncertain upper limit valued disturbances is developed. With the proposed control method, the robustness property is preserved even at the smallest gain values and thus the chattering effect, which is the main problem of the sliding mode control, is reduced. In this study, MATLAB / SIMULINK simulations and experimental results of the inverted pendulum control system are compared and the positive effect of the proposed control method is confirmed. Bu çalışmada gerçek bir ters sarkaç sistemi için yeni bir uyarlamalı kazançlı, bağımsız yüzeyli kayan kip denetim tekniği (UKKKD) önerilmektedir. Böylece modellenemeyen ve üst sınır değerleri belirli olmayan bozucu etkilere karşı dayanıklı bir denetim yapısı elde edilmektedir. Önerilen denetim yöntemi ile dayanıklılık özelliği en küçük kazanç değerlerinde dahi korunmakta ve böylece kayan kip denetimin temel problemi olan çatırtı etkisi de azaltılmaktadır. Çalışmada, ters sarkaç ve denetim sisteminin MATLAB/SIMULINK benzetim ile uygulama grafikleri karşılaştırmalı olarak verilmiş ve denetimin olumlu etkisi doğrulanmıştır.624432
In this research, a new nonlinear and adaptive state feedback controller with a fast-adaptive robust differentiator is presented for grid-tied inverters. All parameters and external disturbances are taken as uncertain in the design of the proposed controller without the disadvantages of singularity and over-parameterization. A robust differentiator based on the second order sliding mode is also developed with a fast-adaptive structure to be able to consider the time derivative of the virtual control input. Unlike the conventional backstepping, the proposed differentiator overcomes the problem of explosion of complexity. In the closed-loop control system, the three phase source currents and direct current (DC) bus voltage are assumed to be available for feedback. Using the Lyapunov stability theory, it is proven that the overall control system has the global asymptotic stability. In addition, a new simple L filter design method based on the total harmonic distortion approach is also proposed. Simulations and experimental results show that the proposed controller assurances drive the tracking errors to zero with better performance, and it is robust against all uncertainties. Moreover, the proposed L filter design method matches the total harmonic distortion (THD) aim in the design with the experimental result.
Permanent magnet synchronous motors (PMSMs) are utilized in demanding conditions and applications requiring precision and accuracy, such as servo systems. Especially at low speeds, the effects of cogging torque, current measurement and offset errors, improper controller gains, mechanical resonance, and torque fluctuations caused by load torque and flux result in fluctuations at various frequencies in the motor output speed. This study, motivated by two factors, proposes an extended state observer (ESO)-based multivariable fast response extremum-seeking (FESC) interval type-2 fuzzy PID (IT2FPID) controller to improve dynamic response and reduce speed ripple at low speeds in situations where all these negative factors could arise. This approach enables the real-time adaptation of parameters to counteract the decline in controller performance caused by the nonlinear characteristics of PMSMs and parameter fluctuations while also optimizing disturbance rejection in the speed response under varying operating conditions and existing speed ripple. The experimental results from the prototype setup validate that the proposed control mechanism is functional, valid, and precise in diminishing speed ripples during low-speed operations. The simulation and test outcomes of the control scheme show that speed noise at low speeds is reduced from 26% to 3% compared to traditional proportional-integral (PI) controller and supertwisting (STW) sliding mode controller (SMC) responses and that the scheme exhibits a 16–23% reduction in undershoot amplitude and faster recovery in the presence of load torque variations.
31 May 2025 in Kocaeli Journal of Science and Engineering
One of the most popular motors for precise control applications, such as electric vehicles, is the permanent magnet synchronous motor (PMSM). Under harsh conditions, PMSM and its drives are expected to provide robust control response against internal and external disturbances. Conventional controllers used in the vector control method have difficulty providing superior control responses due to the nonlinear structure of the PMSM. Although sliding mode control is a good control method to fulfill these control requirements, it has a chattering effect due to high-speed switching phenomenon. To reduce this effect and to obtain a better dynamic response, super-twisting sliding mode control (ST-SMC) is one of the control method candidates. In the classical ST-SMC control method, since the sliding surface consists of error or error-integral of the error, the finite time convergence to the equilibrium point is not fast enough. In this study, a new nonlinear sliding surface is designed in the ST-SMC controller for speed control of PMSM. In addition, equivalent control terms and an error-dependent exponential term are added to the control input to speed up the output response. In this way, the ST-SMC algorithm is experimentally applied to control the speed of the PMSM under harsh operating conditions with reduced chattering, shortened convergence time, and increased robustness against internal and external disturbances. The experimental implementation of the designed controller is carried out on a 400 W PMSM motor test setup. The superiority of the proposed control algorithm is comparatively demonstrated under operating conditions such as step speed reference and load torque.