In this work, TiO₂ nanoparticles were successfully synthesized with narrow size distribution via a wet ball milling sol-gel method. The effect of calcination temperature on photocatalytic activity was observed from particle size, crystallite size, and phase transition of TiO₂ nanoparticles. Increasing calcination temperature increased particle size, crystallite size, and the crystallinity of synthesized TiO₂. Phase transition depended on variation in calcination temperatures. A two-phase mixture of anatase and brookite was obtained with lower calcination temperature whereas a three-phase mixture appeared when calcination temperature was 500–600 °C. With higher temperature, the rutile phase kept increasing until it was the only phase observed at 800 °C. Anatase strongly affected the photocatalytic activity from 300 °C to 600 °C while the particle size of TiO₂ was found to have a dominant effect on the photocatalytic activity between 600 °C and 700 °C. A mixture of three phases of TiO₂-600 exhibited the highest methylene blue degradation with the rate constant of 9.46 × 10⁻² h⁻¹ under ultraviolet (UV) irradiation.

Smart materials with light-actuated shape memory effects are developed from renewable resources in this work. Bio-based benzoxazine resin is prepared from vanillin, furfurylamine, and paraformaldehyde by utilizing the Mannich-like condensation. Vanillin-furfurylamine-containing benzoxazine resin (V-fa) is subsequently copolymerized with epoxidized castor oil (ECO). When the copolymer is reinforced with multiwalled carbon nanotubes (MWCNTs), the resulting composite exhibits shape memory effects. Molecular characteristics of V-fa resin, ECO, and V-fa/ECO copolymers are obtained from Fourier transform infrared (FT-IR) spectroscopy. Curing behavior of V-fa/ECO copolymers is investigated by differential scanning calorimetry. Dynamic mechanical properties of MWCNT reinforced V-fa/ECO composites are determined by dynamic mechanical analysis. Morphological details and distribution of MWCNTs within the copolymer matrix are characterized by transmission electron microscopy. Shape memory performances of MWCNT reinforced V-fa/ECO composites are studied by shape memory tests performed with a universal testing machine. After a significant deformation to a temporary shape, the composites can be recovered to the original shape by near-infrared (NIR) laser actuation. The shape recovery process can be stimulated at a specific site of the composite simply by focusing NIR laser to that site. The shape recovery time of the composites under NIR actuation is four times faster than the shape recovery process under conventional thermal activation. Furthermore, the composites possess good shape fixity and good shape recovery under NIR actuation.

Bacteriophages have potential for use as biological control agents (biocontrols) of pathogenic bacteria, but their low stability is limiting for their utilization as biocontrols. Understanding of the conditions conducive to storage of phages in which infectivity is maintained over long periods will be useful for their application as biocontrols. We employed a nanomechanical approach to study how external environmental factors affect surface properties and infectivity of the podovirus C22 phage, a candidate for biocontrol of Ralstonia solanacearum, the agent of bacterial wilt in crops. We performed atomic force microscopy (AFM)-based nano-indentation on the C22 phage in buffers with varying pH and ionic strength. The infectivity data from plaque assay in the same conditions revealed that an intermediate range of stiffness was associated with phage titer that remained consistently high, even after prolonged storage up to 182 days. The data are consistent with the model that C22 phage must adopt a metastable state for maximal infectivity, and external factors that alter the stiffness of the phage capsid lead to perturbation of this infective state.