Patrick Hermanns

Mr. Patrick Hermanns

Ruhr University, Bochum, Germany

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2017 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
MEMax Engelhardt
Max Engelhardt
SRStefan Ries
Stefan Ries
PHPatrick Hermanns
Patrick Hermanns
NBNikita Bibinov
Nikita Bibinov
PAPeter Awakowicz
Peter Awakowicz
A smooth layer of hard aluminium film is deposited onto a glass substrate with a multi-frequency CCP discharge and then treated in the effluent of a non-equilibrium atmospheric pressure plasma jet (N-APPJ) operated with Ar flow. A thin filament is formed in the argon N-APPJ through contraction of a diffuse feather-like discharge. The aluminium surface treated in the effluents of the N-APPJ is significantly modified. Erosion tracks of different forms and micro-balls composed of aluminium are observed on the treated surface. Based on CCD images of active plasma discharge channels, SEM images of the treated surface and current–voltage characteristics, these surface modifications are interpreted as traces of plasma spots and plasmoids. Plasma spots are focused plasma channels, which are characterized by an intense emission in CCD images at the contact point of a plasma channel with the treated metal surface and by deep short tracks on the aluminium surface, observed in SEM images. Plasmoids are plasma objects without contact to any power supply which can produce long, thin and shallow traces, as can be observed on the treated surface using electron microscopy. Based on observed traces and numerous transformations of plasma spots to plasmoids and vice versa, it is supposed that both types of plasma objects are formed by an extremely high axial magnetic field and differ from each other due to the existence or absence of contact to a power supply and the consequential transport of electric current. The reason for the magnetic field at the axis of these plasma objects is possibly a circular current of electron pairs in vortices, which are formed in plasma by the interaction of ionization waves with the substrate surface. The extremely high magnetic field of plasma spots and plasmoids leads to a local destruction of the metal film and top layer of the glass substrate and to an attraction of paramagnetic materials, namely aluminium and oxygen. The magnetic attraction of aluminium is a reason for the extraction of some pieces of metal and the formation of erosion tracks and holes in the metal film. In the absence of metal atomization, the extracted aluminium forms spherical micro-particles, which are distributed over the surface of the treated metal film by the gas flow. A thin (100 nm) gold (diamagnetic) layer on top of the aluminium film surface reduces the erosion rate of plasma spots and plasmoids drastically (more than three orders of magnitude).

20 April 2023 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
KOKevin Ollegott
Kevin Ollegott
PWPhilipp Wirth
Philipp Wirth
COChristian Oberste-Beulmann
Christian Oberste-Beulmann
GSGokul Siddarth Mani Sakthi
Gokul Siddarth Mani Sakthi
AMAliya Magazova
Aliya Magazova
MMMartin Muhler
Martin Muhler
Dielectric barrier discharges are an emerging technology for the plasma-catalytic removal of volatile organic compounds and other gas purification challenges such as the removal of O2 traces from H2. Packed-bed reactors are mainly used for these applications, but surface dielectric barrier discharges (SDBDs) typically printed on thin dielectric plates are promising alternatives for the treatment of large volumetric flow rates due to their low flow resistance causing a low pressure drop. Especially for SDBDs the flow conditions are crucial, because the active plasma filled volume covering the mentioned plates with a typical thickness of 0.1 mm is small in comparison to the overall reactor volume with a typical distance of some tens of millimeters to the reactor wall. In this study, the flow conditions of a twin-SDBD were investigated by Schlieren imaging applied in converting O2 traces in H2 containing gas mixtures to H2O and compared to fluid dynamics simulations. Schlieren imaging was used to visualize local gradients of the refractive index inside the SDBD reaction chamber, while gas composition, dissipated power, or flow rate were varied. Without a plasma discharge, laminar flow dominates, resulting in a conversion below 10% over a Pt-coated electrode configuration in the reaction of O2 traces with H2. With the plasma discharge, full conversion was achieved for the same reaction without catalyst, although the plasma is also confined to the surface of the electrode configuration. Schlieren structures covering the complete cross section of the reaction chamber were observed, showing that strong radial mass transport is induced by the plasma. The shape and extent of the Schlieren structures is ascribed to a superimposition of gas flow, thermal expansion from the plasma volume, thermal buoyancy as well as an electrohydrodynamic force between the electrodes and the grounded reactor walls. Fluid dynamics simulations show vortex formation above and below the electrode, created by the electrohydrodynamic force further implying extensive mass transport by the plasma, which is visualized in addition by carbonaceous deposits on the reactor lid. This emerging deposition pattern during toluene decomposition closely corresponds to the electrode geometry. It is proposed that the reaction proceeds only in the active plasma volume and that reactive species transported to the bulk gas phase only have a minor contribution. Thus, the degree of conversion of the SDBD reactor is not only determined by the chemical reactivity in the plasma volume, but also by its plasma-induced mass transport resulting in efficient gas mixing. These findings reveal new possibilities to improve SDBD reactors for gas purification applications based on their favorable flow conditions.

1 August 2020 in Plasma Sources Science and Technology
Verified
Journal Article
Open access
PDF file
SBSimon Böddeker
Simon Böddeker
VBVera Bracht
Vera Bracht
PHPatrick Hermanns
Patrick Hermanns
SGSven Groeger
Sven Groeger
FKFriederike Kogelheide
Friederike Kogelheide
PAPeter Awakowicz
Peter Awakowicz
In this work a gliding arc plasmatron consisting of a filamentary discharge rotating in a nitrogen vortex flow at low DC current (I = 100 mA) is investigated. The gas flow swirl of the plasmatron is produced by six tangential gas inlets. The Reynolds number of the nitrogen flow through these tubes at the flow rate of Q = 10 slm amounts to about 2400, which is in the intermediate range. Under these conditions, the formation of micro-vortices can be caused by small gas flow disturbances like e.g. a tube edge. The operation of the GA plasmatron at these conditions is accompanied by the production of plasma spots at the anode surface, namely near the gas inlets. Melted and solidified metal is found in erosion traces left by plasma spots at the anode surface. It is established that melting of stainless steel cannot be caused by an axial current of I = 100 mA of plasma spots and an helical current is supposed. This assumption is confirmed by microscope images of eroded traces with toroidal melting areas. These experimental results corroborate a hypothesis of previous studies, concerning the gliding arc physics, about the formation of plasma objects with an axial magnetic field by the interaction of micro-vortices with the plasma channel.

3 August 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PHPatrick Hermanns
Patrick Hermanns
SBSimon Boeddeker
Simon Boeddeker
VBVera Bracht
Vera Bracht
NBNikita Bibinov
Nikita Bibinov
PAPeter Awakowicz
Peter Awakowicz
Microdischarges occurring during plasma electrolytic oxidation are the main mechanism promoting oxide growth compared to classical anodization. When the dissipated energy by microdischarges during the coating process gets too large, high-intensity discharges might occur, which are detrimental to the oxide layer. In bipolar pulsed plasma electrolytic oxidation a so called ‘soft-sparking’ mode limits microdischarge growth. This method is not available for unipolar pulsing and for all material combinations. In this work, the authors provide a method to control the size- and intensity distributions of microdischarges by utilizing a multivariable closed-loop control. In-situ detection of microdischarge properties by CCD-camera measurements and fast image processing algorithms are deployed. The visible size of microdischarges is controlled by adjusting the duty cycle in a closed-loop feedback scheme, utilizing a PI-controller. Uncontrolled measurements are compared to controlled cases. The microdischarge sizes are controlled to a mean value of A = 5 ⋅ 10 − 3 m m 2 and A = 7 ⋅ 10 − 3 m m 2 , respectively. Results for controlled cases show, that size and intensity distributions remain constant over the processing time of 35 minutes. Larger, high-intensity discharges can be effectively prevented. Optical emission spectra reveal, that certain spectral lines can be influenced or controlled with this method. Calculated black body radiation fits with very good agreement to measured continuum emission spectra ( T = 3200   K ). Variance of microdischarge size, emission intensity and continuum radiation between consecutive measurements is reduced to a large extent, promoting uniform microdischarge and oxide layer properties. A reduced variance in surface defects can be seen in SEM measurements, after coating for 35 minutes, for controlled cases. Surface defect study shows increased number density of microdischarge impact regions, while at the same time reducing pancake diameters, implying reduced microdischarge energies compared to uncontrolled cases.

3 November 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PHPatrick Hermanns
Patrick Hermanns
SBSimon Boeddeker
Simon Boeddeker
VBVera Bracht
Vera Bracht
NBNikita Bibinov
Nikita Bibinov
GGGuido Grundmeier
Guido Grundmeier
PAPeter Awakowicz
Peter Awakowicz
The unipolar pulsed-plasma electrolytic oxidation (PEO) of aluminum has been replaced by bipolar pulsed methods that use a so-called ‘soft-sparking’mode. This method results in an effective reduction of intense microdischarges, which are detrimental to the oxide layer. In a previous publication, we developed an in-situ multivariable microdischarge control scheme using unipolar pulsing. Using this method, it is possible to restrict the mean microdischarge size to well-defined limits, while at the same time influencing the mean microdischarge energy, number density or spectral emission behaviour. This method operates well inside a frequency range of f = 1 − 20   k H z . Although this method shows highly desirable plasma control properties, the mechanisms defining this frequency-dependent controllability are unclear. The aim of this study is to visualize the spatio-temporal behavior of microdischarges in higher frequency ranges. First, a wavelet transform was performed to estimate the temporal evolution of microdischarge lifetimes. Ceramic coatings were then deposited on aluminum alloy substrates in an aqueous solution using unipolar pulsed galvanostatic PEO. The aluminum samples were coated for 30 min at frequencies of f 1 = 50   H z , f 2 = 5   k H z and f 3 = 100   k H z . High-speed imaging was carried out utilizing four synchronized intensified charge-coupled device (ICCD) cameras, each with a 500 ns exposure time. At f 2 = 5   k H z , the microdischarges were still able to follow the electrical pulses. In this regime, the process can be divided into two stages, an initial charging of the substrate surface without plasma emission and a subsequent slower evolution of microdischarges. Equivalent circuit model descriptions are given for both processes. At f 3 = 100   k H z , microdischarges were not able to follow the pulse frequency, as the lifetimes and risetimes of the microdischarge characteristics were longer than the pulse length. Reignition at the same spatial location, clustering and permanent ignition through pulse periods were observed.

7 December 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PHPatrick Hermanns
Patrick Hermanns
FKFriederike Kogelheide
Friederike Kogelheide
VBVera Bracht
Vera Bracht
SRStefan Ries
Stefan Ries
FKFlorian Krüger
Florian Krüger
PAPeter Awakowicz
Peter Awakowicz
Numerous studies have shown that dielectric barrier discharge (DBD) and DBD-like plasma jets interact with a treated surface in a complex manner. Eroded traces after treatment cannot be explained by conventional plasma-surface interaction theory. The mechanisms of a controlled formation of these plasma objects is still unclear. In this work, the authors show that the formation rate and characteristics of eroded traces, treating a titanium surface, can be controlled by process design and the combination of materials used. A thin (0.45 µ m) layer of titanium film is deposited onto a glass substrate and is then treated in the effluent of a non-equilibrium atmospheric pressure plasma jet (N-APPJ) operated with argon or krypton flow. Plasma spots with diameters ranging from 100–700 µ m are observed using an intensified digital camera on the titanium film surface. These plasma objects are strongly inhomogeneous, forming a core with a very high current density and leave erosion holes with diameters of about 1 µ m. By using krypton as a working gas, effective erosion of the titanium substrate can be shown, whereas by using argon no traces are detected. For the latter case, traces can be provoked by deposition of a thin aluminum layer on top of the titanium substrate, by creation of artificial scratches or by an additional swirling flow around the discharge. Based on the experimental results presented in this and previous papers, it is assumed that plasma spots with dense cores are produced by an interaction of micro-vortices within the plasma channel and by the formation of an extremely high axial magnetic field. This assumption is confirmed by destruction of the treated surface material, extraction of paramagnetic atoms and toroidal substrate heating, which is most likely caused by a helical current of the plasma spot.