In the face of water shortages, the world seeks to explore all available options in reducing the over exploitation of limited freshwater resources. One of the surest available water resources is wastewater. As the population grows, industrial, agricultural, and domestic activities increase accordingly in order to cater for the voluminous needs of man. These activities produce large volumes of wastewater from which water can be reclaimed to serve many purposes. Over the years, conventional wastewater treatment processes have succeeded to some extent in treating effluents for discharge purposes. However, improvements in wastewater treatment processes are necessary in order to make treated wastewater re-usable for industrial, agricultural, and domestic purposes. Membrane technology has emerged as a favorite choice for reclaiming water from different wastewater streams for re-use. This review looks at the trending membrane technologies in wastewater treatment, their advantages and disadvantages. It also discusses membrane fouling, membrane cleaning, and membrane modules. Finally, recommendations for future research pertaining to the application of membrane technology in wastewater treatment are made.

In this study, three coagulants (ferromagnetite (F), alum (A), and eggshells (E)) and their hybrids (FA, FE, and FEA) were investigated as possible cost-effective coagulants for the treatment of industrial wastewater. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray (EDX) was used to characterize the morphological and elemental compositions of the coagulants. The effects of coagulant dosage (10–60 mg/L) and settling time were investigated for the removal of turbidity, color, and total suspended solids. A jar tester (JTL6) operating at conditions of 150 rpm for 2 min (rapid mixing) and 30 rpm for 15 min (slow mixing) was employed. Results from the characterized supernatant showed about 80% removal of the contaminants. The prospects of F were proven to be the most effective as compared to the binary (FA > FE) and the ternary hybridized (FEA) coagulants. At an optimum dosage and settling time of 20 mg/L and 30 min, respectively, the treatability performance of F was clearly proven to be viable for wastewater treatment.

The increase in heavy metal contamination has led to an increase in studies investigating alternative sustainable ways to treat heavy metals. Nanotechnology has been shown to be an environmentally friendly technology for treating heavy metals and other contaminants from contaminated water. However, this technology is not widely used in wastewater treatment plants (WWTPs) due to high operational costs. The increasing interest in reducing costs by applying nanotechnology in wastewater treatment has resulted in an increase in studies investigating sustainable ways of producing nanoparticles. Certain researchers have suggested that sustainable and cheap raw materials must be used for the production of cheaper nanoparticles. This has led to an increase in studies investigating the production of nanoparticles from plant materials. Additionally, production of nanoparticles through biological methods has also been recognized as a promising, cost-effective method of producing nanoparticles. Some studies have shown that the recycling of nanoparticles can potentially reduce the costs of using freshly produced nanoparticles. This review evaluates the economic impact of these new developments on nanotechnology in wastewater treatment. An in-depth market assessment of nanoparticle application and the economic feasibility of nanoparticle applications in WWTPs is presented. Moreover, the challenges and opportunities of using nanoparticles for heavy metal removal are also discussed.

One of the most pressing problems worldwide is inadequate access to potable water. Many technologies have been applied to address this through research to find robust but inexpensive methods of desalination that offer high fluxes and use less energy, while reducing chemical use and environmental impact. Membrane desalination technology is universally considered to solve water shortage problems due to its high efficiency and lower energy consumption than distillation methods. This review focuses on the desalination performance of membrane technologies with consideration of the effect of driving force, potential technologies, membrane types, flux, energy consumption and operating temperature, etc. Pressure driven membrane processes (MF, UF, NF, RO), and their fouling propensity and major drawbacks are discussed briefly. Membrane characteristics and the effects of operating conditions on desalination are also covered. Organic-hybrid and inorganic membrane materials can offer advantages, with high flux, good selectivity, and useful chemical and thermal resistance.

The photocatalytic degradation of a local South Africa oil refinery wastewater was conducted under UV radiation using an aqueous catalyst of titanium dioxide (TiO2), Degussa P25 (80% anatase, 20% rutile) in suspension. The experiment was carried out in a batch aerated photocatalytic reactor based on a central composite design (CCD) and analyzed using response surface methodology (RSM). The effects of three operational variables viz. TiO₂ dosage (2–8 g/L), runtime (30–90 minutes), and airflow rate (0.768–1.48 L/min) were examined for the removal of phenol and soap oil and grease (SOG). The data derived from the CCD, and the successive analysis of variance (ANOVA) showed the TiO₂ dosage to be the most influential factor, while the other factors were also significant (P < 0.0001). Also, the ANOVA test revealed the second-order of TiO₂ dosage and runtime as the main interaction factors on the removal efficiency. To maximize the pollutant removal, the optimum conditions were found at runtime of 90 minutes, TiO₂ dosage of 8 g/L, and an aeration flow rate of 1.225 L/min. Under the conditions stated, the percentage removal of phenol (300 ± 7) and SOG (4000 ± 23) were 76% and 88% respectively. At 95% confidence level, the predicted models developed results were in reasonable agreement with that of the experimental data, which confirms the adaptability of the models. The first-order kinetic constants were estimated as 0.136 min⁻¹ and 0.083 min⁻¹ for SOG and phenol respectively.

The demand for technological and industrial change has become heavily dependent on the availability and use of petroleum products as a source of energy for socio-economic development. Notwithstanding, petroleum and petrochemical products are strongly related to global economic activities, and their extensive distribution, refining processes, and final routes into the environment pose a threat to human health and the ecosystem. Additional global environmental challenges related to the toxicological impact of air, soil, and water pollutants from hydrocarbons are carcinogenic to animals and humans. Therefore, it is practical to introduce biodegradation as a biological catalyst to address the remediation of petroleum-contaminated ecosystems, adverse impacts, the complexity of hydrocarbons, and resistance to biodegradation. This review presents the bioremediation of petroleum hydrocarbon contaminants in water and soil, focusing on petroleum biodegradable microorganisms essential for the biodegradation of petroleum contaminants. Moreover, explore the mineralization and transformation of complex organic and inorganic contaminants into other simpler compounds by biological agents. In addition, physicochemical and biological factors affecting biodegradation mechanisms and enzymatic systems are expanded. Finally, recent studies on bioremediation techniques with economic prospects for petroleum spill remediation are highlighted.