To investigate the behavior of X-section cast-in-place concrete piles (XCC pile), a series of static load tests for piled foundation are conducted on the basis of a soft soil reinforcement engineering for a sewage treatment plant in the north of Nanjing, China. The testing results are presented in load-settlement curves, pile-soil stress ratios, distributions of skin friction (side friction) and axial force, and load-sharing between side resistance and end-bearing capacity. Comparative analysis between an XCC pile and a circular section concrete pile (circular pile) with the same cross-sectional area indicates that the XCC pile with its increased perimeter can improve the vertical-bearing capacity by 20% because of the larger skin friction. Also, the XCC pile shows increasing pile-soil stress ratio and reduces settlement. The existing design standards for traditional piles can be referenced by the XCC pile composite foundation, because the axial force and skin friction distribution are the same as...

This paper presents an analytical method for calculating the dynamic impedance of pile groups comprising an arbitrary number of cylindrical piles connected with a rigid cap. The solution allows consideration of ground waves due to pile vibration that propagate along both the horizontal and vertical planes, as well as the effect of the actual pile section geometry on the reaction from the surrounding soil. For that, we introduce a dynamic pile–soil–pile interaction factor that is defined on the basis of soil reaction developing on receiver piles, instead of the classical displacement-based interaction factor used in past studies. Despite the fact that the solution is applicable to problems where low-to-moderate soil strains are expected to develop, it poses as an attractive, efficient alternative to numerical methods for the analysis of very large pile groups.

This paper presents an analytical solution methodology for a tubular structure subjected to a transient point loading in low-strain integrity testing. The three-dimensional effects on the pile head and the applicability of plane-section assumption are the main problems in low-strain integrity testing on a large-diameter tubular structure, such as a pipe pile. The propagation of stress waves in a tubular structure cannot be expressed by one-dimensional wave theory on the basis of plane-section assumption. This paper establishes the computational model of a large-diameter tubular structure with a variable wave impedance section, where the soil resistance is simulated by the Winkler model, and the exciting force is simulated with semisinusoidal impulse. The defects are classified into the change in the wall thickness and Young’s modulus. Combining the boundary and initial conditions, a frequency-domain analytical solution of a three-dimensional wave equation is deduced from the Fourier transform method and t...