The spring-loaded inverted pendulum model is similar to human walking in terms of the center of mass (CoM) trajectory and the ground reaction force. It is thus widely used in humanoid robot motion planning. A method that uses a velocity feedback controller to adjust the landing point of a robot leg is inaccurate in the presence of disturbances and a nonlinear optimization method with multiple variables is complicated and thus unsuitable for real-time control. In this paper, to achieve real-time optimization, a CoM-velocity feedback controller is used to calculate the virtual landing point. We construct a touchdown return map based on a virtual landing point and use nonlinear least squares to optimize spring stiffness. For robot whole-body control, hierarchical quadratic programming optimization is used to achieve strict task priority. The dynamic equation is given the highest priority and inverse dynamics are directly used to solve it, reducing the number of optimizations. Simulation and experimental results show that a force-controlled biped robot with the proposed method can stably walk on unknown uneven ground with a maximum obstacle height of 5 cm. The robot can recover from a 5 Nm disturbance during walking without falling.
An optimization framework for upward jumping motion based on quadratic programming (QP) is proposed in this paper, which can simultaneously consider constraints such as the zero moment point (ZMP), limitation of angular accelerations, and anti-slippage. Our approach comprises two parts: the trajectory generation and real-time control. In the trajectory generation for the launch phase, we discretize the continuous trajectories and assume that the accelerations between the two sampling intervals are constant and transcribe the problem into a nonlinear optimization problem. In the real-time control of the stance phase, the over-constrained control objectives such as the tracking of the center of moment (CoM), angle, and angular momentum, and constraints such as the anti-slippage, ZMP, and limitation of joint acceleration are unified within a framework based on QP optimization. Input angles of the actuated joints are thus obtained through a simple iteration. The simulation result reveals that a successful upward jump to a height of 16.4 cm was achieved, which confirms that the controller fully satisfies all constraints and achieves the control objectives.
The highly dynamic legged jumping motion is a challenging research topic because of the lack of established control schemes that handle over-constrained control objectives well in the stance phase, which are coupled and affect each other, and control robot’s posture in the flight phase, in which the robot is underactuated owing to the foot leaving the ground. This paper introduces an approach of realizing the cyclic vertical jumping motion of a planar simplified legged robot that formulates the jump problem within a quadratic-programming (QP)-based framework. Unlike prior works, which have added different weights in front of control tasks to express the relative hierarchy of tasks, in our framework, the hierarchical quadratic programming (HQP) control strategy is used to guarantee the strict prioritization of the center of mass (CoM) in the stance phase while split dynamic equations are incorporated into the unified quadratic-programming framework to restrict the robot’s posture to be near a desired constant value in the flight phase. The controller is tested in two simulation environments with and without the flight phase controller, the results validate the flight phase controller, with the HQP controller having a maximum error of the CoM in the x direction and y direction of 0.47 and 0.82 cm and thus enabling the strict prioritization of the CoM.
Biped robots are similar to human beings and have broad application prospects in the fields of family service, disaster rescue and military affairs. However, simplified models and fixed center of mass (COM) used in previous research ignore the large-scale stability control ability implied by whole-body motion. The present paper proposed a two-level controller based on a simplified model and whole-body dynamics. In high level, a model predictive control (MPC) controller is implemented to improve zero moment point (ZMP) control performance. In low level, a quadratic programming optimization method is adopted to realize trajectory tracking and stabilization with friction and joint constraints. The simulation shows that a 12-degree-of-freedom force-controlled biped robot model, adopting the method proposed in this paper, can recover from a 40 Nm disturbance when walking at 1.44 km/h without adjusting the foot placement, and can walk on an unknown 4 cm high stairs and a rotating slope with a maximum inclination of 10°. The method is also adopted to realize fast walking up to 6 km/h.
The point-foot biped robot is highly adaptable to and can move rapidly on complex, non-structural and non-continuous terrain, as demonstrated in many studies. However, few studies have investigated balance control methods for point-foot sliding on low-friction terrain. This article presents a control framework based on the dual-objective convergence method and whole-body control for the point-foot biped robot to stabilize its posture balance in sliding. In this control framework, a dual-objective convergence equation is used to construct the posture stability criterion and the corresponding equilibrium control task, which are simultaneously converged. Control tasks are then carried out through the whole-body control framework, which adopts an optimization method to calculate the viable joint torque under the physical constraints of dynamics, friction and contact forces. In addition, this article extends the proposed approach to balance control in standing recovery. Finally, the capabilities of the proposed controller are verified in simulations in which a 26.9-kg three-link point-foot biped robot (1) slides over a trapezoidal terrain, (2) slides on terrain with a sinusoidal friction coefficient between 0.05 and 0.25 and (3) stands and recovers from a center-of-mass offset of 0.02 m.