Acoustic emission (AE) released by pine beams retrofitted with fiber reinforced plastic (FRP) and poplar planks in bending is analyzed. Basalt fabric (FB), carbon fabric (FC), and carbon pultruded laminate (LC) have been used as FRP. Experimental results and AE behavior are discussed based on an elastoplastic finite-element numerical model. The model demonstrates a strong strain concentration at the end of poplar planks, which causes high AE activity in these areas and acts as a precursor of the delamination of the poplar plank. Based on the experimental results, some AE criteria for predicting the onset of the delamination are tentatively proposed.

The structural use of timber coming from fast growing and low-grade species such as poplar is one of the current challenges in the wood value chains, through the development of engineering products. In this work, a qualitative comparison of the behavior of mixed glued laminated timber made of pine in their outer layers and of poplar in their inner layers is shown and discussed. Single-species poplar and pine laminated timber have been used as control layouts. The investigation includes destructive four-point bending tests and three non-destructive methodologies: finite elements numerical model; semi-analytical model based on the Parallel Axes theorem and acoustic resonance testing. An excellent agreement between experimental and numerical results is obtained. Although few number of samples have been tested, the results indicate that the use of poplar as a low-grade species in the inner layers of the laminated timber can be a promising technology to decrease the weight of the timber maintaining the good mechanical properties of pine. Likewise, the need for the use of the shear modulus in both experimental measurements and numerical analysis is suggested, as well as the need to reformulate the vibration methodology for non-destructive grading in the case of mixed timber.

This paper presents a particle finite element model for the numerical simulation of sediment transport problems. Fluid motion and sediment motion are coupled in a two-way manner, through boundary shear stress field and through flow domain mesh deformation. Solution of equations for fluid and sediment flows is performed by an explicit particle Lagrangian procedure (PFEM-2), including a fractional step strategy for the fluid flow equations. Previous particle finite element techniques concentrate on the simulation of erosion by removing elements. Here, transport problem includes erosion, saltation, deposition, and avalanche of grains. Numerical tests explore the efficiency of the methodology, either quantitatively or qualitatively.