Methods that link different models for investigating the retrieval of canopy biophysical/structural variables have been substantially adopted in the remote sensing community. To retrieve global biophysical parameters from multiangle data, the kernel-driven bidirectional reflectance distribution function (BRDF) model has been widely applied to satellite multiangle observations to model (interpolate/extrapolate) the bidirectional reflectance factor (BRF) in an arbitrary direction of viewing and solar geometries. Such modeled BRFs, as an essential information source, are then input into an inversion procedure that is devised through a large number of simulation analyses from some widely used physical models that can generalize such an inversion relationship between the BRFs (or their simple algebraic composite) and the biophysical/structural parameter. Therefore, evaluation of such a link between physical models and kernel-driven models contributes to the development of such inversion procedures to accurately retrieve vegetation properties, particularly based on the operational global BRDF parameters derived from satellite multiangle observations (e.g., MODIS). In this study, the main objective is to investigate the potential for linking a popular physical model (PROSAIL) with the widely used kernel-driven Ross-Li models. To do this, the BRFs and albedo are generated by the physical PROSAIL in a forward model, and then the simulated BRFs are input into the kernel-driven BRDF model for retrieval of the BRFs and albedo in the same viewing and solar geometries. To further strengthen such an investigation, a variety of field-measured multiangle reflectances have also been used to investigate the potential for linking these two models. For simulated BRFs generated by the PROSAIL model at 659 and 865 nm, the two models are generally comparable to each other, and the resultant root mean square errors (RMSEs) are 0.0092 and 0.0355, respectively, although some discrepancy in the simulated BRFs can be found at large average leaf angle (ALA) values. Unsurprisingly, albedos generated by the method are quite consistent, and 99.98% and 97.99% of the simulated white sky albedo (WSA) has a divergence less than 0.02. For the field measurements, the kernel-driven model presents somewhat better model-observation congruence than the PROSAIL model. The results show that these models have an overall good consistency for both field-measured and model-simulated BRFs. Therefore, there is potential for linking these two models for looking into the retrieval of canopy biophysical/structural variables through a simulation method, particularly from the current archive of the global routine MODIS BRDF parameters that were produced by the kernel-driven BRDF model; however, erectophile vegetation must be further examined.

Bidirectional reflectance distribution function (BRDF) archetypes extracted from the Moderate Resolution Imaging Spectroradiometer (MODIS) BRDF/Albedo product over the global Earth Observing System Land Validation Core Sites can be used to simplify BRDF models. The present study attempts to evaluate the representativeness of BRDF archetypes for surface reflectance anisotropy. Five-year forward-modeled MODIS multi-angular reflectance (MCD-ref) and aditional actual MODIS multi-angular observations (MCD-obs) in four growing periods in 2008 over three tiles were taken as validation data. First, BRDF archetypes in the principal plane were qualitatively compared with the time-series MODIS BRDF product of randomly sampled pixels. Secondly, BRDF archetypes were used to fit MCD-ref, and the average root-mean-squared errors (RMSEs) over each tile were examined for these five years. Finally, both BRDF archetypes and the MODIS BRDF were used to fit MCD-obs, and the histograms of the fit-RMSEs were compared. The consistency of the directional reflectance between the BRDF archetypes and MODIS BRDFs in nadir-view, hotspot and entire viewing hemisphere at 30° and 50° solar geometries were also examined. The results confirm that BRDF archetypes are representative of surface reflectance anisotropy for available snow-free MODIS data.

The leaf area index (LAI) is a key structural parameter of vegetation canopies. Accordingly, several moderate-resolution global LAI products have been produced and widely used in the field of remote sensing. However, the accuracy of the current moderate-resolution global LAI products cannot satisfy the requirements recommended by the LAI application communities, especially in heterogeneous areas composed of mixed land cover types. In this study, we propose a Mixed-Pixel Correction (MPC) method to improve the accuracy of LAI retrievals over heterogeneous areas by considering the influence of heterogeneity caused by the mixture of different biome types with the help of high-resolution land cover maps. The DART-simulated LAI, the aggregated Landsat LAI and site-based high-resolution LAI reference maps are used to evaluate the performance of the MPC method. The results indicate that the MPC method can reduce the influences of spatial heterogeneity and biome misclassification to obtain the LAI with much better accuracy than the MODIS main algorithm given that the high-resolution land cover map is accurate. The RMSE (bias) decreases from 0.749 (0.486) to 0.414 (0.087), while the R ² increases from 0.084 to 0.524, and the proportion of pixels that fulfill the uncertainty requirement of the GCOS increases from 38.2% to 84.6% for the results of site-based high-resolution LAI reference maps. Spatially explicit information about vegetation fractional cover can further reduce uncertainties induced by variations in canopy density for the results of DART simulated data. The proposed method shows potential for improving global moderate-resolution LAI products.

The foliage Clumping Index (CI) is an important vegetation structure parameter that allows for the accurate separation of sunlit and shaded leaves in a canopy. The CI and its seasonality are critical for global Leaf Area Index (LAI) estimating and ecological modelling. However, the cover of snow tends to reduce the reflectance anisotropy of the vegetation canopy and thus probably influences CI estimates. In this paper, we investigate the influence of snow on the magnitude and seasonal variation of the CI retrieved from Moderate-resolution Imaging Spectroradiometer (MODIS) Bidirectional Reflectance Distribution Function (BRDF) products based on field-measured CI and statistics from the global MODIS CI product. We find that the backup algorithm can effectively correct abnormally large CI values and obtain more reasonable CI retrievals than the main algorithm without any constraints in snow-covered areas. Validation indicates that the time-series CI product shows the potential in investigating the trajectories of the clumping effect in snow seasons. For evergreen forests, the clumping effect is relatively stable throughout the year; however, for deciduous vegetation types, CI values tend to display significant seasonal variations. This study suggests that the latest version of the global MODIS CI product, in which the backup algorithm is used to process the snow-covered pixels, has improved accuracy for CI retrievals in snow-covered areas and thus is probably more suitable as the input parameter for ecological and meteorological models.

The reflectance anisotropy effect on albedo retrieval was evaluated using the Moderate Resolution Imaging Spectroradiometer (MODIS) bidirectional reflectance distribution functions (BRDFs) product, and archetypal BRDFs. Shortwave-band archetypal BRDFs were established, and validated, based on the Anisotropy Flat indeX (AFX) and time series MODIS BRDF over tile h11v03. To generate surface albedo, archetypal BRDFs were used to fit simulated reflectance, based on the least squares method. Albedo was also retrieved based on the least root-mean-square-error (RMSE) method or normalized difference vegetation index (NDVI) based prior BRDF knowledge. The difference between those albedos and the MODIS albedo was used to quantify the reflectance anisotropy effect. The albedo over tile h11v03 for day 185 in 2009 was retrieved from single directional reflectance and the third archetypal BRDF. The results show that six archetypal BRDFs are sufficient to represent the reflectance anisotropy for albedo estimation. For the data used in this study, the relative uncertainty caused by reflectance anisotropy can reach up to 7.4%, 16.2%, and 20.2% for sufficient, insufficient multi-angular and single directional observations. The intermediate archetypal BRDFs may be used to improve the albedo retrieval accuracy from insufficient or single observations with a relative uncertainty range of 8–15%.

The measurement of bidirectional reflectivity for ground-based objects is a highly intricate task, with significant limitations in the capabilities of both ground-based and satellite-based observations from multiple viewpoints. In recent years, unmanned aerial vehicles (UAVs) have emerged as a novel remote sensing method, offering convenience and cost-effectiveness while enabling multi-view observations. This study devised a polygonal flight path along the hemisphere to achieve bidirectional reflectance distribution function (BRDF) measurements for large zenith angles and all azimuth angles. By employing photogrammetry’s principle of aerial triangulation, accurate observation angles were restored, and the geometric structure of “sun-object-view” was constructed. Furthermore, three BRDF models (M_Walthall, RPV, RTLSR) were compared and evaluated at the UAV scale in terms of fitting quality, shape structure, and reflectance errors to assess their inversion performance. The results demonstrated that the RPV model exhibited superior inversion performance followed, by M_Walthall; however, RTLST performed comparatively poorly. Notably, the M_Walthall model excelled in capturing smooth terrain object characteristics while RPV proved applicable to various types of rough terrain objects with multi-scale applicability for both UAVs and satellites. These methods and findings are crucial for an extensive exploration into the bidirectional reflectivity properties of ground-based objects, and provide an essential technical procedure for studying various ground-based objects’ in-plane reflection properties.