Prestressed high-strength concrete (PHC) pipe pile with the static press-in method has been widely used in recent years. The generation and dissipation of excess pore water pressure at the pile–soil interface during pile jacking have an important influence on the pile’s mechanical characteristics and bearing capacity. In addition, this can cause uncontrolled concrete damage. Monitoring the change in excess pore water pressure at the pile–soil interface during pile jacking is a plan that many researchers hope to implement. In this paper, field tests of two full-footjacked piles were carried out in a viscous soil foundation, the laws of generation and dissipation of excess pore water pressure at the pile–soil interface during pile jacking were monitored in real time, and the laws of variation in excess pore water pressure at the pile–soil interface with the burial depth and time were analyzed. As can be seen from the test results, the excess pore water pressure at the pile–soil interface increased to the peak and then began to decline, but the excess pore water pressure after the decline was still relatively large. Test pile S1 decreased from 201.4 to 86.3 kPa, while test pile S2 decreased from 374.1 to 114.3 kPa after pile jacking. The excess pore water pressure at the pile–soil interface rose first at the initial stage of consolidation and dissipated only after the hydraulic gradient between the pile–soil interface and the soil surrounding the pile disappeared. The dissipation degree of excess pore water pressure reached about 75–85%. The excess pore water pressure at the pile–soil interface increased with the increase in buried depth and finally tended to stabilize.

In order to examine the applicability of Fiber Bragg Grating (FBG) sensing technology in the static penetration of pipe piles, static penetration tests in clay were conducted using double-wall open and closed model pipe piles. The strain was measured using FBG sensors, and the plug height was measured using a cable displacement sensor. Using one open pile and two closed piles, the difference in pipe pile penetration was compared and analyzed. Based on FBG sensing technology and the strain data, the penetration characteristics of the pipe pile, such as axial force, lateral friction, and driving resistance were examined. Results showed that FBG sensing technology has superior testing performance for the pipe pile penetration process, can accurately reflect the strain time history of pipe piles, and can clearly reflect the penetration process of pipe piles with increasing penetration depth. In addition, the variation law of the characteristics of the jacked pile pile–soil interface was obtained. This test has significance for model tests and the engineering design of pipe piles.

It is of great significance to study the mechanical behavior and permeability properties of hydrate-bearing sediments for a safe, efficient, and sustainable exploitation of hydrate. However, most of the studies conducted so far have focused only on a single stress field or seepage field, which is detached from practical engineering. In this paper, a new integrated experimental system (IES) was proposed, which realizes the coupling study of stress and seepage. The main body of IES is a triaxial subsystem and a seepage subsystem. The triaxial subsystem can realize in situ synthesis and triaxial shear of hydrate-bearing sediments (HBS). Stable seepage can be effectively formed using a constant pressure infusion pump and a back pressure valve. A series of shear–seepage coupling tests were carried out to verify the effectiveness of the IES and explore the stress–seepage coupling characteristics of HBS. The results show that stress has a significant influence on permeability, and its essence is the stress compression on the seepage channel. The stress–strain relationship, volume response, and permeability are related to each other. The permeability will be affected by the coupling of hydrate saturation (pore plugging), effective confining pressure (pore compression), and shear (fracture generation).

Photoelectric integrated testing technology was used to study precast piles during pile jacking at the pile–soil interface considering the influence of the earth and pore water pressures on its vertical bearing performance. The low temperature sensitive fiber Bragg grating (FBG) strain sensors and miniature silicon piezoresistive sensors were implanted in the model pile to test the changes of earth pressure, pore water pressure and pile axial force of the jacked pile at the pile–soil interface, and the influence of lateral pressure on pile axial force was studied. The test results showed that the nylon rod is feasible as a model pile. The FBG strain sensor had a stable performance and monitored changes in the axial force of the model pile in real time. The miniature earth and pore water pressure sensors were small enough to avoid size effects and accurately measured changes in the earth and pore water pressures during the pile jacking process. During pile jacking, the lateral earth pressure increased gradually in depth, and the lateral earth pressure at the same depth tended to decrease at greater depths. Lateral pressures caused the axial force of the pile to increases by a factor of 1–2, where the maximum was 2.7. Therefore, the influence of the lateral pressure must be considered when studying the residual pile stress.

The aim of this work is to explore the influence of the end resistance and shaft resistance regarding the mechanism for jacked pile penetration and the load‐transfer rule during the penetration process. A full‐scale field test was conducted in an actual project located in Dongying, Shandong Province, China. In this test, the axial strain experienced by two closed Prestressed High‐strength Concrete (PHC) pipe piles during jacking into layered soil was monitored successfully using Fiber Bragg Grating (FBG) sensors mounted on the pile shaft. The experimental results show that FBG sensors have a good stability, strong antijamming performance, and can effectively monitor the pile stress. The variation law of the jacking force reflects the distribution of the soil layer, and the hardness of the soil layer at the pile end limits the pile force. When the pile end enters the silt layer from the clay layer, the jacking force and shaft resistance increase by 2.5 and 1.7, respectively. The shaft resistance accounted for 44.99% of the jacking force. The end resistance is affected by the mechanical properties of soil, and the end resistance of the silt layer is approximately twice that of the clay layer. The end resistance of the silt layer accounted for 59.84% of the jacking force. When the pile end enters the soft soil layer from the hard soil layer, the impact of the pile driving speed and the tangential force on the surface of the pile body must both be considered. During the pile penetration process, as the penetration depth increases, the radial stress on the pile side at a given depth is gradually released, while the shaft resistance at the pile side degrades significantly.