The stress-strain response and deformation mechanism of a range of Nomex honeycomb cores tested under in-plane compression has been examined experimentally. The cores with a thin wall displayed extensive bending deformation of the cell walls inclined to the horizontal (loading is vertical) and failed in bending. The cores with thicker walls failed by a shear-type instability of the cells indicated by tilting of vertical cell wall segments. The failure strain decreased with increasing core density. The modulus and compressive strength of the core were compared to micromechanical predictions. Normalized modulus and strength values varied between the various cores. The average modulus and strength results allow backing out of the modulus and bending strength of the Nomex paper. The results were in reasonable agreement with published tensile test results and composite micromechanics.
Microwave drying of suspensions of lignocellulosic fibers has the potential to produce porous foam materials that can replace materials such as expanded polystyrene, but the design and control of this drying method are not well understood. The main objective of this study was to develop a microwave drying model capable of predicting moisture loss regardless of the shape and microwave power input. A microwave heating model was developed by coupling electromagnetic and heat transfer physics using a commercial finite element code. The modeling results predicted heating time behavior consistent with experimental results as influenced by electromagnetic fields, waveguide size and microwave power absorption. The microwave heating modeling accurately predicted average temperature increase for water domain at 360 and 840 W microwave power inputs. By dividing the energy absorption by the heat of vaporization, the amount of water evaporation in a specific time increment was predicted leading to a novel method to predict drying. Using this method, the best time increments, and other parameters were determined to predict drying. This novel method predicts the time to dry cellulose foams for a range of sample shapes, parameters, material parameters. The model was in agreement with the experimental results.
Laminate beam theory based design analysis of the sandwich End Notch Flexure (ENF) test specimen is presented. The analysis is specifically considering specimens with honeycomb core, prone to in-plane compression failure of the core, other undesirable failure modes such as face indentation and core shear failure are analyzed. In addition, crack stability and energy dissipation due to frictional sliding between the crack surfaces are analyzed. Parametric analysis of ENF specimens with a range of face and core thickness, is presented to guide the design. In-plane compression failure of the core, but shorten the range of crack lengths were stable growth occurs. A thicker face will also increase the critical load for crack propagation and by so elevate the risk for indentation and core shear failures. Increased core density is beneficial for preventing indentation and core shear failures, but may increase the risk for in-plane compression failure of the core. The thickness of the core does not strongly influence the critical load for crack propagation. A thicker core increases frictional energy loss, but reduces the risk for core shear failure. A thicker core, however, makes the ENF specimen more prone to in-plane compression failure. ENF sandwich specimens with foam and honeycomb core were tested. The test results support the design analysis.
2 January 2020 in Journal of Sandwich Structures & Materials
Fracture mechanics analysis of a face/core interface crack in a honeycomb core sandwich under mode I-dominated loading conditions is considered. The main objective of the study is to examine how to represent the homogenized in-plane extensional properties of hexagonal honeycomb core under deformation constraints due to bonding of the core to the face sheets. 2D parametric finite element analysis is conducted over a wide range of homogenized in-plane extensional properties of the core. The results show that plane stress assumption may lead to crack closure effects and highly distorted core elements for core with low in-plane modulus, while plane strain stabilizes the core deformation. Experimental results from SCB testing of a honeycomb core sandwich support the plane strain constrained modulus approach to face/core debond analysis.
14 April 2026 in International Journal of Air-Conditioning and Refrigeration
This paper focuses on the cooling capacity analysis of aluminium tube evaporator for cooling compartments in domestic refrigerator. The study adapted a framework combining analytical and experimental analyses to investigate the influence of evaporator tube length on the cooling capacity of the freezer and refrigerator. Convective heat transfer co-efficient based on two-phase flow was calculated under four different correlations considering a domestic refrigerator of 246 L volume using R600a refrigerant. Cooling capacity was calculated based on the product of cooling capacity factor and cubic root of volume signifying the heat loss. The cooling capacity factor provides a concrete understanding of the variation in evaporator tube length as a function of different parameters such as thermal conductivity, thickness, temperature etc. An optimized evaporator tube length was considered for the freezer and refrigerator of 246 L domestic refrigerator bestowing uniform cooling capacity factor for four different correlations albeit convective heat transfer coefficient (HTC) varied significantly. To validate the optimized evaporator tube lengths, cooling capacity was examined through pull-down tests for two different commercially available samples of varying volumes and tube lengths for the freezer and refrigerator, as well as the optimized sample with the largest volume. A comparison of the cooling capacity of the two samples and the optimized sample showed that the optimized sample exhibited a higher cooling capacity and achieved temperature convergence earlier. Furthermore, the energy analysis conducted on all samples revealed that optimized sample attained the highest energy efficiency ratio (EER) and least Energy Efficiency Index (EEI).