Ceramic membrane method for moisture recovery from flue gas of thermal power plants is of considerable interest due to its excellent selection performance and corrosion resistance. However, manufacturing costs of commercial ceramic membranes are still relatively expensive, which promotes the development of new methods for preparing low-cost ceramic membranes. In this study, a method for the preparation of porous ceramic membrane supports is proposed. Low-cost fly ash from power plants is the main material of the membrane supports, and talcum is the additive. The fabrication process of the ceramic membrane supports is described in detail. The properties of the supports were fully characterized, including surface morphology, phase composition, pore diameter distribution, and porosity. The mechanical strength of the supports was measured. The obtained ceramic membrane supports displays a pore size of about 5 μm and porosity of 37.8%. Furthermore, the water recovery performance of the supports under different operating conditions was experimentally studied. The experimental results show that the recovered water flux varies with operating conditions. In the study, the maximum recovered water flux reaches 5.22 kg/(m²·h). The findings provide a guidance for the ceramic membrane supports application of water recovery from flue gas.

In this work, a ceramic membrane tube with a pore size of 1 μm was used to conduct experimental research on moisture and waste heat recovery from flue gas. The length, inner/outer diameter, and porosity were 800 mm, 8/12 mm, and 27.2%, respectively. In the experiments, the flue gas, which was artificially prepared, flowed on the shell side of membrane module. The water coolant passed through the membrane counter-currently with the gas. The effects of flue gas flow rate, flue gas temperature, water coolant flux, and water coolant temperature on the membrane recovery performance were analyzed. The results indicated that, upon increasing the flue gas flow rate and its temperature, both the amount of recycled water and the recovered heat increased. The amount of recycled water, recycled water rate, recovered heat, and heat recovery rate all decreased as the water coolant temperature increased. When the water coolant temperature exceeded 30 °C, the amount of recycled water dropped sharply. The maximum amounts of recycled water, recovered heat, and total heat transfer coefficient were 2.93 kg/(m²·h), 3.63 kW/m², and 224.3 W/(m²·K), respectively.

The solar energy supply system has played an increasingly substantial role in realizing nearly zero-carbon buildings. In order to overcome the impact of solar randomness on the energy supply of a distributed solar system, this paper proposes a solar tri-generation supply system which integrates a photovoltaic/thermal collector (PV/T), a heat pump (HP), and an absorption chiller (AC). The PV/T-HP integration system is adopted to provide stable heating for a building and AC. The system model is established in TRNSYS software, and its performance is evaluated based on energy, exergy, and economic aspects. The results demonstrate that the system effectively meets the load demand, with an energy efficiency of 32.98% and an exergy efficiency of 17.62%. The payback period (PP) is 7.77 years. Compared with the systems proposed in the other literature, the performance of the proposed system has a certain extent of advantage. Furthermore, the equipment and system exergy performance decline with an increase in the intensity of solar radiation. Increasing the PV/T area effectively improves the system’s profitability within the actual roof area limitation of the building. Moreover, increasing the capacity of the low-temperature heat pump after 68 kW improves the system efficiency and reduces the payback period. In summary, this paper proposes an efficient distributed solar energy system that is suitable for urban building energy supply.

In this paper, an integrated system based on low-concentrated photovoltaic/thermal (LCPV/T) technology and efficient vacuum membrane distillation (VMD) seawater desalination utilizing the energy of solar is established. Through a theoretical analysis and a series of experiments, this paper explores the temperature change of a single VMD process, and the variation trend of single-day membrane flux with solar irradiation and temperature parameters. In addition, the changes in solar irradiation, temperatures of the integrated system, membrane flux, and thermoelectric properties in different seasons are also analyzed. A mathematical model was established to calculate the relationship between membrane flux and temperature difference. The experimental results show that the membrane flux of VMD is 2.73 L/(m²·h); the simulated seawater can achieve a desalination rate of 99.9%. After economic analysis, the operating incomes of the system under sunny weather conditions in different seasons were all positive.

Integrated energy systems (IES) are widely recognized as a key pathway toward carbon neutrality, enabling the coupling and coordinated optimization of electricity, heat, gas, and cooling. This review provides a structured, technology-oriented overview of IES based on a unified five-subsystem framework (production, conversion, transmission, storage, and consumption). It systematically covers: (1) renewable energy utilization—solar, wind, and geothermal—supported by a global spatial distribution map and representative top-performing commercial products; (2) energy cascade utilization, where combined heat and power/combined cooling, heating and power (CHP/CCHP) raises overall efficiency from approximately 35–40% to 70–90%; (3) multi-form energy storage—electrical, electrochemical, chemical, thermal, and mechanical—distinguishing short-term balancing (e.g., lithium-ion (Li-ion), flywheels, supercapacitors, with 85–95% round-trip efficiency) from long-duration and seasonal applications (e.g., pumped hydro, hydrogen/power-to-gas (P2G), redox flow batteries); and (4) forecasting, collaborative optimization, and the bidirectional integration of IES with smart grids and grid modernization. A strategic strengths, weaknesses, opportunities, and threats–Political, Economic, Sociological, Technological, Legal, and Environmental (SWOT–PESTLE) analysis is further presented to position IES within the global energy transition. The review highlights that IES and grid innovation are mutually enabling, and that realizing the full carbon-neutrality potential of IES requires coordinated progress in standardization, digitalization, long-duration storage, and cross-sector policy alignment.