SiC crystal is an excellent substrate material for high power electronic devices and high-frequency electronic devices. Being cost-effective and defect-free are the two biggest challenges at present. For the physical vapor transport (PVT) growth of a SiC single crystal, SiC powder is used as the source material, which determines the cost and the quality of the crystal. In this paper, we propose a new design in which graphite blocks are substituted for the non-sublimated SiC powder. Temperature distribution in the SiC powder, the evolution of the SiC powder, and the vapor transport are investigated by using finite element calculations. With the addition of graphite blocks, the utilization and sublimation rate of SiC powder is higher. In addition, the reverse vapor transport above the SiC powder is eliminated. This design provides a new idea to reduce the cost of SiC crystals in industrialization.
Effective stress! By comparing the calculation and experimental results, a possible value of effective stress to evaluate the effect of nitrogen dopant on dislocation density is proposed.
To optimize crystal growth rates, it is advisable to choose rotational speeds corresponding to specific melt heights. In this study, rotating the crystal at 20–30 rpm in a double-vortex pattern resulted in a higher average growth rate.
The influence of growth front temperature (left) and C/Si ratio (right) on the axial resistivity distribution during SiC crystal growth by the PVT method.