The energy of real-time systems for embedded usage needs to be efficient without affecting the system’s ability to meet task deadlines. Dynamic body bias (BB) scaling is a promising approach to managing leakage energy and operational speed, especially for system-on-insulator devices. However, traditional energy models cannot deal with the overhead of adjusting the BB voltage; thus, the models are not accurate. This paper presents a more accurate model for calculating energy overhead using an analytical double exponential expression for dynamic BB scaling and an optimization method based on nonlinear programming with consideration of the real-chip parameter constraints. The use of the proposed model resulted in an energy reduction of about 32% at lower frequencies in comparison with the conventional model. Moreover, the energy overhead was reduced to approximately 14% of the total energy consumption. This methodology provides a framework and design guidelines for real-time systems and computer-aided design.
1 January 2018 in IEICE Transactions on Information and Systems
In the past decade, real-time systems (RTSs), which must maintain time constraints to avoid catastrophic consequences, have been widely introduced into various embedded systems and Internet of Things (IoTs). The RTSs are required to be energy efficient as they are used in embedded devices in which battery life is important. In this study, we investigated the RTS energy efficiency by analyzing the ability of body bias (BB) in providing a satisfying tradeoff between performance and energy. We propose a practical and realistic model that includes the BB energy and timing overhead in addition to idle region analysis. This study was conducted using accurate parameters extracted from a real chip using silicon on thin box (SOTB) technology. By using the BB control based on the proposed model, about 34% energy reduction was achieved.