A possibility of extending the pot life of the HTPB-TDI based propellant binder system without adverse modification of mechanical properties is explored in the present study. It is proposed that by tailoring functionality distribution of the base HTPB polymer and changing the binder composition concurrently, the pot life of the binder system can be extended while the mechanical characteristics are kept within the acceptability window. Using an existing empirical relationship between fraction of high molecular weight (Fh) in HTPB and r-value corresponding to a more optimized set of mechanical properties, the r-values were calculated for different HTPB resins. HTPB resins with widely varying fractions of high molecular weight (Fh) were chosen and binder networks were prepared at different r values. Viscosity build up and chemical kinetics were studied for different formulations. From the studies, it is shown that the extension of pot-life is achievable by about 150 minutes without sacrificing the mechanical characteristics.
Polyurethane networks between hydroxyl terminated polybutadiene (HTPB) and butanediol (BD) were prepared using toluene diisocyanate (TDI) as the curative. HTPB and BD were taken at equivalent ratios viz.: 1:0, 1:1, 1:2, 1:4, and 1:8. Crosslink density (CLD) was theoretically calculated using α-model equations developed by Marsh. CLD for the polyurethane networks was experimentally evaluated from equilibrium swell and stress–strain data. Young’s modulus and Mooney–Rivlin approaches were adopted to calculate CLD from stress–strain data. Experimentally obtained CLD values were enormously higher than theoretical values especially at higher BD/HTPB equivalent ratios. The difference in the theoretical and experimental values for CLD was explained in terms of local crystallization due to the formation of hard segments and hydrogen bonded interactions.