Mesh reflectors with large apertures have been used in many communication satellites. The performance of antenna reflectors crucially depends on the faceting error of the reflective surface, which is approximated by using meshes. The force density method (FDM) has been widely used for the form-finding analysis of mesh reflectors. However, after performing form-finding of some meshes, the effective reflective area will decrease. In addition, the form-finding of the auxiliary mesh has received little attention, and it cannot be achieved by using the FDM. Thus, in this study, an effective form-finding methodology that combines the iterative FDM and the minimum norm method (MNM) is proposed. To consider the flexibility of the reflector ring truss, a static analysis of the ring truss under the tension force actions is also performed in the form-finding processes. The reflector flexible parts are described by the absolute nodal coordinate formulation (ANCF). Finally, the form-finding analysis of the reflector with the standard configuration, the central hub configuration, and the circular configuration is performed to validate the proposed methodology. The influence of the mesh tension force on the reflector natural frequencies is also studied. After performing the form-finding analysis, the initial configuration of the reflector with tensioned meshes for the deployment dynamics study can be determined. Based on this paper, the deployment dynamics of a complex AstroMesh reflector will be studied in a successive paper “Dynamics of a Deployable Mesh Reflector of Satellite Antenna: Parallel Computation and Deployment Simulation.”
13 July 2016 in Journal of Computational and Nonlinear Dynamics
The finite-element approach of absolute nodal coordinate formulation (ANCF) is a possible way to simulate the deployment dynamics of a large-scale mesh reflector of satellite antenna. However, the large number of finite elements of ANCF significantly increases the dimension of the dynamic equations for the deployable mesh reflector and leads to a great challenge for the efficient dynamic simulation. A new parallel computation methodology is proposed to solve the differential algebraic equations for the mesh reflector multibody system. The mesh reflector system is first decomposed into several independent subsystems by cutting its joints or finite-element grids. Then, the Schur complement method is used to eliminate the internal generalized coordinates of each subsystem and the Lagrange multipliers for joint constraint equations associated with the internal variables. With an increase of the number of subsystems, the dimension of simultaneous linear equations generated in the numerical solution process will inevitably increase. By using the multilevel decomposition approach, the dimension of the simultaneous linear equations is further reduced. Two numerical examples are used to validate the efficiency and accuracy of the proposed parallel computation methodology. Finally, the dynamic simulation for a 500 s deployment process of a complex AstroMesh reflector with over 190,000 generalized coordinates is efficiently completed within 78 hrs.