Hajer Chemingui

Dr. Hajer Chemingui

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2022 in Environmental Technology
Verified
Journal Article
Closed access
HCHajer Chemingui
Hajer Chemingui
AMAli Moulahi
Ali Moulahi
TMTakwa Missaoui
Takwa Missaoui
AAAbdelhadi H. Al-Marri
Abdelhadi H. Al-Marri
AHAmor Hafiane
Amor Hafiane
This study investigates the eco-friendly synthesis of zinc oxide nanoparticles (ZnO NPs) utilizing an aqueous solution of Hibiscus sabdariffa L flower extract, which is acts as reducing agent as well as capping agent. The Fourier transform infrared spectroscopy (FTIR) results revealed the presence of flavonoids and phenols in the plant extract, indicating that they were the major agents capable of reducing zinc nitrate salt. According to our x-ray diffraction (XRD) results, ZnO-NPs exhibit a particular phase wurtzite structure. The ZnO-NPs are spherical in shape and have an average size of 15 nm, according to the measurements of electron microscope (SEM) and transmission electron microscope (TEM) measurements. Energy dispersion (EDX) analysis demonstrates that the NPs are mainly composed of zinc and oxygen. The zeta potential of these nanoparticles shows that they are very stable. The antibacterial activity of ZnO-NPs was tested using agar dilutions with a variety of gram-positive and gram-negative microorganisms. According to the research results, ZnO-NPs can be established as an extremely specific antibacterial agent for a wide variety of organisms to prevent bacterial growth. Furthermore, the antioxidant properties of ZnO-NPs were determined using the 2,2 diphenyl-1-picrylhydrazyl hydrate (DPPH) radical scavenging approach, and the IC50 value of 38 μg/mL was measured for ZnO-NPs. Furthermore, the biosynthesized ZnO-NPs showed significant catalytic performance of methyl orange (MO) under UV irradiation. Overall, ZnO-NPs in their produced state have excellent potential in biomedical and wastewater treatment applications. Radical scavengers were used to evaluate the role of radicals in the reaction mechanism. GRAPHICAL ABSTRACT

29 March 2021 in International Journal of Environmental Analytical Chemistry
Verified
Journal Article
Closed access
HCHajer Chemingui
Hajer Chemingui
SRSouad Rezma
Souad Rezma
RLRidha Lafi
Ridha Lafi
ZAZahrah Alhalili
Zahrah Alhalili
TMTakwa Missaoui
Takwa Missaoui
AHAmor Hafiane
Amor Hafiane
Throughout this report, ZnO nanoparticles are synthesised by co-precipitation as a new adsorbent. XRD, FTIR, SEM, PL, and UV-visible spectroscopy characterise the obtained nanoparticles. Characterisation of prepared nanoparticles provided evidence of the impact of duration of calcination on particle size and morphology. The new adsorbent was used to remove cationic dye (methylene blue (MB)) from aqueous solutions by batch adsorption technique. The effect of pH, adsorbent dosage, ion strength, contact time, and the temperature was investigated. The pHPZC was approximately pH 7.2. The results revealed that an amount of 0.1 g/L ZnO-NPs showed maximum removal efficiency of each dye (50 ppm) at pH 8.5. The adsorption process of the MB followed the Langmuir model with a correlating constant (R2) higher than 0.99 and with a maximum capacity (qm) value of 62.5 mg/g. The pseudo-second-order (R2 > 0.9986) model was most appropriate in the description of the adsorption process. Thermodynamic parameters ΔS0(0.0001 J/mol K), ΔH0 (– 3,692 kJ/mol), and ΔG0(between − 4.143 to and – 4.189 kJ/mol) were investigated at four temperatures (25, 35, 45, and 55°C). The uptake process of the MB occurs spontaneously following an exothermic process and shows that the adsorption follows the physisorption mechanism. It would appear that hydrogen bonding was included in the potential mechanism governing MB adsorption on the ZnO nanoparticles at pH 8.5. In order to optimise various process parameters, e.g. pH solution (X1: 4–11), adsorbing dose (X2: 0,01–0,1 g/L), [MB] Concentration dye (X3: 50–300 mg/L), and contact time (X4: 20–120 min), Box–Behnken, design (BBD) in response surface methodology (RSM) was used. The experimental results were based on a second-order polynomial equation. Overall, the adjusted coefficient of determination (R2) value of 0.99 indicated that the used model was quite suitable and the selected RSM was successful in optimising the decolarizations conditions of MB.

10 April 2024 in Clean Technologies and Environmental Policy
Verified
Journal Article
Closed access
PDF file
HCHajer Chemingui
Hajer Chemingui
MKMalak Kahloul
Malak Kahloul
BABadra El Abed
Badra El Abed
TATaissire Ben Amor
Taissire Ben Amor
AHAmor Hafiane
Amor Hafiane

13 April 2024 in Biomass Conversion and Biorefinery
Verified
Journal Article
Closed access
PDF file
HCHajer Chemingui
Hajer Chemingui
RLRidha Lafi
Ridha Lafi
TMTakwa Missaoui
Takwa Missaoui
IMImed Montasser
Imed Montasser
AHAmor Hafiane
Amor Hafiane
MKMadiha Kamoun
Madiha Kamoun

29 November 2021 in Materials Research Express
Verified
Journal Article
Open access
ABAouatef Boughdiri
Aouatef Boughdiri
IOIbtissem Ounifi
Ibtissem Ounifi
HCHajer Chemingui
Hajer Chemingui
CUClaudia Ursino
Claudia Ursino
AGAmalia Gordano
Amalia Gordano
EFEzzedine Ferjani
Ezzedine Ferjani
This work reported a new perspective on improving the incorporation of nanoparticles(NPs) into membranes for several applications. Composite membranes were produced via the phase inversion method using cellulose acetate (CA) as the polymer, mixed with four different NPs: ZnO and Fe3O4 NPs were prepared by the co-precipitation method, while SiO2 and TiO2 NPs were commercial NPs. The impact of NPs on the membrane morphology was investigated by SEM and AFM. The composite CA membranes have been characterized by their contact angle, porosity, and water content. Membrane performance has been investigated in terms of water permeability and salt retention such as NaCl and Na2SO4. The produced CA composite membrane could be successfully applied for salt removal, particularly the CA-Fe3O4 composite membrane, which shows good water permeability (15.4 L/m2h bar) and higher salt rejection (93%).Consequently, the use of low-density hydrophilic NPs in the polymeric dope solution produces membranes with higher hydrophilicity and the ability to reduce the membrane fouling.

16 August 2024 in Chemical Engineering & Technology
Verified
Journal Article
Closed access
IGImene Gritli
Imene Gritli
HCHajer Chemingui
Hajer Chemingui
KDKais Djebali
Kais Djebali
MWMABROUK Walid
MABROUK Walid
AHAmor Hafiane
Amor Hafiane
SKSherif Keshk
Sherif Keshk