Sang Eui Lee

Prof. Sang Eui Lee

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 February 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ELEun Sun Lee
Eun Sun Lee
TGTae Sik Goh
Tae Sik Goh
JHJinyoung Heo
Jinyoung Heo
YKYoon-Jin Kim
Yoon-Jin Kim
SLSang Eui Lee
Sang Eui Lee
CLChiseung Lee
Chiseung Lee
This paper proposes an optimum design of the pedicle screw with respect to bone density and variables of the screw design. First, pedicle screws are designed and manufactured with design variables including the core diameter and conical angle that affect the pullout force of the pedicle screw. Variables of bone density are also classified into two groups, namely grade 10 (0.16 g/cc) with osteoporotic bone density and grade 20 (0.32 g/cc) with normal bone density. The effect of each parameter on the pullout force and relationship between the pullout force and screw designs are investigated. Furthermore, bone damage after fixation failure or insertion in the patient body is considered separately from the pullout strength. Therefore, cross sectional images of the artificial bone are observed to analyze the degree of damage after the pullout test of the pedicle screw by using micro-CT (computed tomography). The region and degree of bone damage are quantitatively analyzed. The effects of the core diameter and conical angle of the pedicle screw on the pulling force, bone damage, and fracture behavior are analyzed via the aforementioned experiments and analysis. An optimal pedicle screw design is suggested based on the experimental results.

13 March 2017 in Ships and Offshore Structures
Verified
Journal Article
Open access
SLSang Eui Lee
Sang Eui Lee
SSSelcuk Sahin
Selcuk Sahin
PRPhilippe Rigo
Philippe Rigo
MPMinsue Park
Minsue Park
JPJeom Kee Paik
Jeom Kee Paik
Cutouts – perforations that are often made in wind turbine towers to allow access or passage – can also reduce the towers’ ultimate strength. Thus, cutouts may need to be included in the ultimate strength formulations for wind turbine towers as an influential parameter, where significant. The aims of this study are to examine the effects of cutouts on the ultimate-strength characteristics of wind turbine towers and to propose empirical formulae to predict the reduced ultimate strength under axial compression and pure bending. The structural features of cutouts and towers in real wind turbines are investigated, and the effects of different design variables – such as shape, location, aspect ratio, column slenderness ratio, and column aspect ratio – on the ultimate-strength behaviour are described. The ultimate strengths of the towers are computed using elastic–plastic large-deflection finite element analyses. Empirical formulae accommodating a whole range of actual dimensional characteristics of cutouts and towers are derived and proposed. The findings of this research and the proposed formulae have the potential to enhance the structural design and safety assessment of wind turbine towers.

1 February 2023 in Journal of Coastal Research
Verified
Journal Article
Closed access
PDF file
SBSeung-Woo Byun
Seung-Woo Byun
SLSang Eui Lee
Sang Eui Lee
Byun, S.-W. and Lee, S.-E., 2023. Numerical assessment of the hydrodynamic loads for a manta type unmanned underwater vehicle: Oblique towing tank test. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 598-602. Charlotte (North Carolina), ISSN 0749-0208. Hydrodynamic loads must be accurately predicted to design robust control systems for Unmanned Underwater Vehicles (UUVs). Conventionally, these loads are estimated through either towing tank experiments (involving oblique frameworks, planar motion mechanisms, or rotating arm tests) or semi-empirical methods. With enhancements in high-performance computing capacities, the reliability of numerical analysis techniques based on computational fluid dynamics has reached the level of experiments. Therefore, this study was aimed at developing a numerical computational model for the oblique towing test of a UUV and estimating the hydrodynamic loads. Specifically, a 1:6 scale model of a manta-type UUV with a length of 12 m was developed. Simulations were performed using the commercial RANS-based viscous solver STARCCM+ (v. 17.06). The model was validated by comparing the numerical results with those of a towing tank experiment.

25 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SLSang Eui Lee
Sang Eui Lee
DLDong-Myung Lee
Dong-Myung Lee
A structure located in seismic regions must have a resistance capacity based on current seismic design codes and maintain this capacity for its design life. However, the responses of structures to several major earthquakes worldwide over the past decade have demonstrated the inadequacy of current seismic design codes. Thus, there is a need for an accurate method for assessing the strength of structures under seismic loads. Accordingly, this study aimed to numerically review the structural performance of a typical firefighting water tank equipped with an anti-wave plate under seismic loads. Quasi-static and transient structural analysis methods were developed to determine the structural strength of the water tank. In addition, a one-way fluid–structure interaction (FSI) method was developed to analyse the effect of the anti-wave plate on the liquid-sloshing motion in and the structural strength of the water tank. Moreover, convergence tests were performed to aid the development of mesh models and grid models for finite element method and finite volume method analyses, respectively. Subsequently, the structural responses of the water tank were determined via quasi-static, transient, and one-way FSI analyses. Finally, the effectiveness of the anti-wave plate for mitigating the sloshing pressure in the water tank and the structural responses according to the pressure change were analyzed. The commercial software ANSYS Workbench (ver. 2020R2) was used.

8 October 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
BLByung-Hyuk Lee
Byung-Hyuk Lee
SLSang Eui Lee
Sang Eui Lee
Flettner rotors can improve ship energy efficiency by using wind energy, and wind-tunnel measurements are widely used to validate their computational models. However, differences between experimental and numerical spanwise boundary and end conditions can significantly affect the aerodynamic forces of a finite rotating cylinder. This study investigates the effects of spanwise boundary conditions, domain height, rotation strength, and an end plate at Re=1.0E+06 using an SST k-omega based detached-eddy simulation model. Symmetry, periodic, wall, and velocity-inlet conditions are compared. Symmetry and periodic conditions produce nearly two-dimensional flows with excessive lift and very low drag. A wall-wall condition with G/H=1.0 gives forces close to the experimental values, but this agreement is obtained with both cylinder ends constrained by walls. When a free-end passage is introduced, pressure-driven flow over the cylinder end reduces circulation and modifies the spanwise loading. The end plate restricts this flow and increases lift at high velocity ratios. These results show that agreement in total forces alone is insufficient for CFD validation, and that consistent representation of experimental boundary and end conditions is also required.

31 December 2020 in Journal of the Korean Society of Marine Environment & Safety
Verified
Journal Article
Closed access
SLSang Eui Lee
Sang Eui Lee