The corrosion inhibition property of selected small organic compounds was investigated using electrochemical measurements, including potentiodynamic polarization (PDP), linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and density functional theory (DFT) calculations. The inhibition efficiency (IE %) of the inhibitor on mild steel (MS) in 1 M HCl was then determined. Results show that the presence of the inhibitors resulted in decreased corrosion current density (Icorr) values and increased polarization resistance (Rp). Furthermore, the use of higher concentrations of inhibitors led to an increased inhibition efficiency. Tafel slopes and shifts in the Ecorr values suggested that the inhibitors tested are mixed-type inhibitors that form a protective layer on the surface of the substrate. Of the organic compound inhibitors tested, the inhibitor 4-ethylpyridine (EP) exhibited the highest Rp values and inhibition efficiency values from the PDP, LPR, and EIS analyses, respectively. DFT calculations showed negative adsorption energies and confirmed the chemisorption of the inhibitors allowing for the formation of a hydrophobic protective film against corrosion and correlations between the quantum chemical values and electrochemical data were demonstrated. The results show the influence of the presence of electronegative O, S, and N atoms, as well as the role of aromatic rings in the promotion of surface protection by preventing aggressive ionic species from binding onto MS.
The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV–vis spectrophotometry. The formation of a metal complex between SP1 and Cu2+ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV–vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0–20 μM Cu2+) with high selectivity for Cu2+ ions over biologically and environmentally relevant metals such as Na+, K+, Mn2+, Ca2+, Zn2+, Co2+, Mg2+, Ni2+, Fe3+, Cd2+, and Pb2+. Since the color change accompanying SP1–Cu2+ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu2+ ions.
A nanocrystalline Si layer can be formed by the surface structure chemical transfer (SSCT) method in which a platinum mesh is instantaneously contacted with polycrystalline Si wafers immersed in hydrogen peroxide plus hydrofluoric acid solutions. The polycrystalline Si surface after the SSCT method possesses an ultra-low reflectivity. The nanocrystalline Si layer possesses a 100–150 nm thickness, and gives a photoluminescence with a peak maximum at ∼670 nm, indicating band-gap widening. The minority carrier lifetime of as-sliced Si wafers greatly increases after the SSCT method most probably due to the enlargement of the nanocrystalline Si band-gap.
1 June 2021 in Asian Pacific Journal of Tropical Biomedicine
Polyphenols are the secondary metabolic products of plants and are considered as active constituents to possess therapeutic effects. To date, a vast number of scientific literature addressed the potential of polyphenols as bio-efficient compounds owing to their structural diversity. Due to the presence of several hydroxyl groups, they are metabolized quickly due to conjugation reaction and thus, readily produce toxic metabolites as a defense material against many pathogens, reflecting their safety strategy. This review focuses on the anti-quorum sensing and biofilm inhibition activity of polyphenols, which display their potential to treat bacterial infections by combating the virulence caused by pathogenic agents. Thus, for mitigating quorum sensing-controlled pathogenesis, the use of polyphenol-based phytochemicals holds immense potential to cure infections. The application of polyphenol as sensitizing agent/ adjuvant therapeutics which act in synergism with antibiotics is highly remarkable.