This study employs a numerical simulation approach to investigate argon bubble flow behavior within a steel continuous casting mold, with a focus on the impact of bubble swarm correction models. Three scenarios are compared: one without any correction and two incorporating drag coefficient corrections, specifically designed for bubble swarm effects. The results demonstrate that incorporating these correction models significantly improves the predictive accuracy of simulations. In particular, the inclusion of a bubble swarm correction model reduces the error in predicted bubble trajectories by 51.7% and 23.0%, respectively, when measured by Hausdorff distances against experimental trajectory data, compared to the scenario without corrections. These findings underline the importance of selecting an appropriate drag correction model for accurate simulations of bubble dynamics and their interaction with the liquid steel in continuous casting molds. This study highlights that drag correction models tailored to the specific conditions of the continuous casting process are essential for achieving realistic predictions.
In a steel continuous casting mold, argon bubbles injected through the submerged entry nozzle undergo transport, coalescence, and turbulent breakup, producing a polydisperse bubble swarm that affects flow stability and defect formation. In this study, an Euler–Lagrange model coupled with bubble collision coalescence and turbulence-induced breakup sub-models was established and validated using water model observations. Three daughter-bubble volume distribution models were compared in terms of bubble-cloud morphology, number-fraction distribution, and median-diameter evolution at different gas flow rates. For the median bubble diameter at different gas flow rates, the M-type model gives the lowest mean absolute error of 0.0349 mm. Large bubbles with diameters greater than 2.5 mm accounted for about 4% of the total number and were mainly concentrated near the SEN, whereas small bubbles with diameters of 1.0–1.5 mm accounted for about 60% and were dispersed throughout the upper recirculation region. Mechanism analysis further shows that bubble transport is drag-dominated in the high-velocity jet region, while buoyancy becomes more important in weaker flow regions; turbulent breakup is localized mainly in high-dissipation regions.