The present study addresses the tree counting of a Eucalyptus plantation, the most widely planted hardwood in the world. Unmanned aerial vehicle (UAV) light detection and ranging (LiDAR) was used for the estimation of Eucalyptus trees. LiDAR-based estimation of Eucalyptus is a challenge due to the irregular shape and multiple trunks. To overcome this difficulty, the layer of the point cloud containing the stems was automatically classified and extracted according to the height thresholds, and those points were horizontally projected. Two different procedures were applied on these points. One is based on creating a buffer around each single point and combining the overlapping resulting polygons. The other one consists of a two-dimensional raster calculated from a kernel density estimation with an axis-aligned bivariate quartic kernel. Results were assessed against the manual interpretation of the LiDAR point cloud. Both methods yielded a detection rate (DR) of 103.7% and 113.6%, respectively. Results of the application of the local maxima filter to the canopy height model (CHM) intensely depends on the algorithm and the CHM pixel size. Additionally, the height of each tree was calculated from the CHM. Estimates of tree height produced from the CHM was sensitive to spatial resolution. A resolution of 2.0 m produced a R² and a root mean square error (RMSE) of 0.99 m and 0.34 m, respectively. A finer resolution of 0.5 m produced a more accurate height estimation, with a R² and a RMSE of 0.99 and 0.44 m, respectively. The quality of the results is a step toward precision forestry in eucalypt plantations.

Over the last several decades, thanks to improvements in and the diversification of open-access satellite imagery, land cover mapping techniques have evolved significantly. Notable changes in these techniques involve the automation of different steps, yielding promising results in terms of accuracy, class detection and efficiency. The most successful methodologies that have arisen rely on the use of multi-temporal data. Several different approaches have proven successful. In this study, one of the most recently developed methodologies is tested in the region of Galicia (in Northwestern Spain), with the aim of filling gaps in the mapping needs of the Galician forestry sector. The methodology mainly consists of performing a supervised classification of individual images from a selected time series and then combining them through aggregation using decision criteria. Several of the steps of the methodology can be addressed in multiple ways: pixel resolution selection, classification model building and aggregation methods. The effectiveness of these three tasks as well as some others are tested and evaluated and the most accurate and efficient parameters for the case study area are highlighted. The final land cover map that is obtained for Galicia has high accuracy metrics (an overall accuracy of 91.6%), which is in line with previous studies that have followed this methodology in other regions. This study has led to the development of an efficient open-access solution to support the mapping needs of the forestry sector.

Key message: This study details a methodology to automatically detect the positions of and dasometric information about individual Eucalyptus trees from a point cloud acquired with a portable LiDAR system. Currently, the implementation of portable laser scanners (PLS) in forest inventories is being studied, since they allow for significantly reduced field-work time and costs when compared to the traditional inventory methods and other LiDAR systems. However, it has been shown that their operability and efficiency are dependent upon the species assessed, and therefore, there is a need for more research assessing different types of stands and species. Additionally, a few studies have been conducted in Eucalyptus stands, one of the tree genus that is most commonly planted around the world. In this study, a PLS system was tested in a Eucalyptus globulus stand to obtain different metrics of individual trees. An automatic methodology to obtain inventory data (individual tree positions, DBH, diameter at different heights, and height of individual trees) was developed using public domain software. The results were compared to results obtained with a static terrestrial laser scanner (TLS). The methodology was able to identify 100% of the trees present in the stand in both the PLS and TLS point clouds. For the PLS point cloud, the RMSE of the DBH obtained was 0.0716, and for the TLS point cloud, it was 0.176. The RMSE for height for the PLS point cloud was 3.415 m, while for the PLS point cloud, it was 10.712 m. This study demonstrates the applicability of PLS systems for the estimation of the metrics of individual trees in adult Eucalyptus globulus stands.

To optimize suppression, restoration, and prevention plans against wildfire, postfire assessment is a key input. Since little research has been carried out on applying Sentinel-2 imagery through an integrated approach to evaluate how environmental parameters affect fire severity, this work aims to fill this gap. A set of large forest fires that occurred in northwest Spain during extreme weather conditions were adopted as a case study. Sentinel-2 information was used to build the fire severity map and to evaluate the relation between it and a set of its driving factors: land cover, aspect, slope, proximity to the nearest stream, and fire recurrence. The cover types most affected by fire were scrubland, rocky areas, and Eucalyptus. The presence of streams was identified as a major cause of the reduced severity of fires in broadleaves. The occurrence of fires in the past is linked to the severity of fires, depending on the land cover. This research aims to help fire researchers, authority managers, and policy makers distinguish the conditions under which the damage by fire is minimized and optimize the resources allocated to restoration and future fire suppression.

Highly fragmented land property hinders the planning and management of single species tree plantations. In such situations, acquiring information about the available resources is challenging. This study aims to propose a method to locate and characterize tree plantations in these cases. Galicia (Northwest of Spain) is an area where property is extremely divided into small parcels. European chestnut (Castanea sativa) plantations are an important source of income there; however, it is often difficult to obtain information about them due to their small size and scattered distribution. Therefore, we selected a Galician region with a high presence of chestnut plantations as a case study area in order to locate and characterize small plantations using open-access data. First, we detected the location of chestnut plantations applying a supervised classification for a combination of: Sentinel-2 images and the open-access low-density Light Detection and Ranging (LiDAR) point clouds, obtained from the untapped open-access LiDAR Spanish national database. Three classification algorithms were used: Random Forest (RF), Support Vector Machine (SVM), and XGBoost. We later characterized the plots at the tree-level using the LiDAR point-cloud. We detected individual trees and obtained their height applying a local maxima algorithm to a point-cloud-derived Canopy Height Model (CHM). We also calculated the crown surface of each tree by applying a method based on two-dimensional (2D) tree shape reconstruction and canopy segmentation to a projection of the LiDAR point cloud. Chestnut plantations were detected with an overall accuracy of 81.5%. Individual trees were identified with a detection rate of 96%. The coefficient of determination R² value for tree height estimation was 0.83, while for the crown surface calculation it was 0.74. The accuracy achieved with these open-access databases makes the proposed procedure suitable for acquiring knowledge about the location and state of chestnut plantations as well as for monitoring their evolution.