With the COVID-19 pandemic, the wearing of face masks covering mouth and nose has become ubiquitous all around the world. This study investigates the impact of typical face masks on voice radiation. To analyze the transmission loss caused by masks and the influence of masks on directivity, this study measured the full-spherical voice directivity of a dummy head with a mouth simulator covered with six masks of different types, i.e., medical masks, filtering facepiece respirator masks, and cloth face coverings. The results show a significant frequency-dependent transmission loss, which varies depending on the mask, especially above 2 kHz. Furthermore, the two facepiece respirator masks also significantly affect speech directivity, as determined by the directivity index (DI). Compared to the measurements without a mask, the DI deviates by up to 7 dB at frequencies above 3 kHz. For all other masks, the deviations are below 2 dB in all third-octave frequency bands.
28 March 2019 in IEEE/ACM Transactions on Audio, Speech, and Language Processing
Spherical microphone arrays (SMAs) are widely used to capture spatial sound fields that can then be rendered in various ways as a virtual acoustic environment (VAE) including headphone-based binaural synthesis. Several practical limitations have a significant impact on the fidelity of the rendered VAE. The finite number of microphones of SMAs leads to spatial undersampling of the captured sound field, which, on the one hand, induces spatial aliasing artifacts and, on the other hand, limits the...
11 September 2023 in IEEE/ACM Transactions on Audio, Speech, and Language Processing
Head-related transfer functions (HRTFs) are essential for virtual acoustic realities because they contain all cues for localizing sound sources in three-dimensional space. Acoustic measurements are one way to obtain high-quality HRTFs. To reduce measurement time, cost, and complexity of measurement systems, a promising approach is to capture only a few HRTFs on a sparse sampling grid and then upsample them to a dense HRTF set by interpolation. However, HRTF interpolation is challenging because small changes in source position can result in significant changes in the HRTF phase and magnitude response. Previous studies have greatly improved the interpolation by time-aligning the HRTFs in pre-processing, but magnitude interpolation errors remain a problem, especially in contralateral regions. Building on time-aligned interpolation, we propose a post-interpolation magnitude correction derived from a frequency-smoothed HRTF representation. Our technical evaluation based on 96 individual simulated HRTF sets shows that the magnitude correction reduces subject-averaged magnitude errors in the higher frequency range by up to 1.5 dB when averaged over all directions and by up to 4 dB in the contralateral region. As a result, interaural level differences in the upsampled HRTFs are also improved. The accompanying perceptual evaluation shows that the magnitude correction significantly reduces perceived coloration and results in a more stable and accurate perceived source position. Additional technical evaluations show that the proposed method outperforms current machine learning based algorithms, can be used with measured HRTFs, and is superior to using a dummy head HRTF set even when only six source positions are used for upsampling.
1 June 2021 in The Journal of the Acoustical Society of America
Dynamic directivity is a specific characteristic of the human voice, showing time-dependent variations while speaking or singing. To study and model the human voice's articulation-dependencies and provide datasets that can be applied in virtual acoustic environments, full-spherical voice directivity measurements were carried out for 13 persons while articulating eight phonemes. Since it is nearly impossible for subjects to repeat exactly the same articulation numerous times, the sound radiation was captured simultaneously using a surrounding spherical microphone array with 32 microphones and then subsequently spatially upsampled to a dense sampling grid. Based on these dense directivity patterns, the spherical voice directivity was studied for different phonemes, and phoneme-dependent variations were analyzed. The differences between the phonemes can, to some extent, be explained by articulation-dependent properties, e.g., the mouth opening size. The directivity index, averaged across all subjects, varied by a maximum of 3 dB between any of the vowels or fricatives, and statistical analysis showed that these phoneme-dependent differences are significant.