Fine particle matter (PM_2.5) was directly related to seasonal weather, and has become the influencing factor of air quality that is harmful for human health in Chiang Rai province. The aims were determining the elemental composition in PM_2.5 and human health risk in haze (March 2021) and non-haze episodes (July–August 2021). Nine elements in PM_2.5 were measured by using an Atomic Absorption Spectrophotometer, and an enrichment factor was used to identify the emission source. The results showed that the average concentration of PM_2.5 was 63.07 μg/m³ in haze episodes, and 25.00 μg/m³ in a non-haze episode. The maximum concentration was 116.7 μg/m³ in March. The majority of elements originated from anthropogenic sources. In haze episodes, PM_2.5 mean concentration was approximately 4.2 times that of the WHO guidelines (15 μg/m³ 24 h), and 1.3 times that of the Thai Ambient Air Quality Standard (50 μg/m³). The analysis of backward air mass trajectory showed that transboundary and local sources significantly influenced PM_2.5 at the monitoring site in the sampling period. In the health risk assessment, the non-carcinogenic risk of Cd was the highest, with a Hazard Quotient (HQ) of 0.048, and the cancer risk of Cr was classified as the highest cancer risk, with the values of 1.29 × 10⁻⁵, higher than the minimum acceptable level.

Hill tribes are a group of people who live in remote areas in northern Thailand. They typically use untreated water for drinking, that can lead several health problems. The six main hill tribes—Akha, Hmong, Karen, Lahu, Lisu, and Yao—were selected for the study. A validated questionnaire was used for data collection. Water samples were collected from the selected villages and tested for the quality at Mae Fah Luang University, Thailand. Results: the major sources of drinking water were mountain water supplies (74.3%), and commercial bottled water (21.4%). Easy access, sufficiency for the whole year, and food-drug administration sign labeled were the criteria used for selecting sources of drinking water. Colorless and safety were also used as a selection criteria for their drinking water in some tribes. Lisu, Karen, and Hmong treated their drinking water by boiling, while Akha and Lahu stored the water in certain containers to allow particle settling before drinking water without treatment. 42.0% of the water samples had a turbidity values <5 NTU, and total coliform and fecal coliform bacteria were detected in 100.0% of the samples. To prevent water-borne diseases among the hill tribe people, appropriate water treatments such as boiling, filtration, and disinfection are recommended.

Thermodynamically driven salts and annealing processes developed the pure silk fibroin (SF) membranes from Bombyx mori cocoons. For more generation, the silk fibroin solution 5 wt% mixed the sodium chloride (NaCl) and polyethylene glycol (PEG). The top surface and cross-section of silk fibroin mixed with NaCl (SF/NaCl) showed pore in the surface membrane and hydrophilic property. The β-sheet content in the SF/NaCl membrane is higher than pure silk fibroin (SF) and the silk fibroin mixed with PEG (SF/PEG) membranes. Then cadmium (Cd), lead (Pb), and mercury (Hg) metals in water filtered pass through only SF/NaCl experimented. The pressure, pH, and temperature were effect by the flow rate efficiency of SF/NaCl membranes. The results showed that the highest % removal of Cd, Pb, and Hg were 45.36%, 61.43%, and 86.87%, respectively. The best condition of absorption capacity was 8.50, 6.42, and 41.14 mg/g for Cd, Pb, and Hg. As a natural biopolymer, SF/NaCl possibly apply for Hg removal for water treatment, its nontoxicity, excellent biocompatibility, and mechanical toughness.

Bangkok City is served mainly by non-sewered systems (NSSS), which rely on vacuum trucks to collect fecal sludge (FS) from various sources, including cesspools, septic tanks, and pre-fabricated treatment units. However, safely-managed sanitation in Bangkok City could not be achieved because only 13% of the collected FS is properly treated at two fecal sludge treatment plants (FSTPs). This study aimed to develop an effective FS collection model for fecal sludge management (FSM) by examining key factors, such as the volume of vacuum trucks per area (TA), acceptable collection cost (ACC), % annual accessibility service (AS), and % illegal vacuum truck services (ITS), utilizing multiple linear regression (MLR). The findings indicated that the improved % FS collection efficiencies to be ‘moderate’ and ‘high’ could be achieved by increasing the TA, ACC, and AS values to be 0.74–1.34 and 1.35–1.40 m3/km2, 4.30–4.60 and 4.61–4.80, and 10.01–15.00 and 15.01–20.00%, respectively, while the ITS values decrease to be 10.01–12.00 and 0.00–10.00%, respectively. To ensure equitable, safe, and sustainable FSM practices for all in Bangkok City toward the year 2030, there are still other challenges to be overcome, such as obtaining budget for improvement actions and cooperation from the concerned stakeholders.