The potential of the nanoscale structure is utilized by electrospun nanofibers, which are promising materials for wound dressings. Here, we prepared wound dressings constituting polycaprolactone (PCL) and chitosan (CS). Curcumin (Cur) and zinc oxide nanoparticles (ZnO) as antibacterial agents were embedded in PCL/CS electrospun nanofibers and different properties including morphology, physicomechanical, interaction with water, antibacterial efficiency, and in vitro studies were investigated. SEM images confirmed the nanofibrous structure of samples with 100 ± 5 to 212 ± 25 nm in average diameter. Elemental analysis of nanofibers showed a good distribution of ZnO along nanofibers which not only caused decreasing in nanofiber diameter but also increased tensile strength of nanofibers up to 2.9 ± 0.5 MPa and with good elongation at break of 39 ± 2.9. ZnO nanoparticles also facilitated the interaction of nanofibers with water, and this led to the highest water vapor transition rate, which was equal to 0.28 ± 0.02 g cm−2 day−1. The sample containing 3 wt% Cur had the highest water uptake value (367 ± 15%) and the lowest water contact angle (78 ± 3.7°), although Cur has a hydrophobic nature. The release profile of Cur showed a two-stage release and the Peppas model predicted a non-fickian diffusion. Simultaneous incorporation of CS, ZnO, and Cur effectively inhibited bacterial growth. In addition, in vitro studies represented that high content of Cur decreases cell viability and cell attachment. The outcomes from the fabricated nanofibrous scaffolds demonstrated appropriate properties for application as a wound dressing.
Two types of carbon nanofillers, i.e. multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GnPs), were chemically functionalized and incorporated into poly(lactic acid) (PLA) through solution mixing to prepare single filler and hybrid PLA nanocomposites. The functionalization of the nanofillers was characterized in detail using FTIR and TGA analysis. X-ray diffraction (XRD) showed that functionalized GnPs (fGnPs) were fully exfoliated in the nanocomposites. The dispersion state of the single and hybrid nanofillers in the polymer matrix was studied in detail by means of melt viscoelastic experiments together with electron microscopy results, which revealed full exfoliation of fGnPs and high dispersion of fCNTs. It was shown that the incorporation of fCNTs–fGnP hybrids into PLA created a large surface area which established strong interfacial adhesion between the efficient hybrid nanofiller networks and the matrix. Positive deviation was observed from the mixture law in the electrical, thermal and mechanical properties. Thorough analysis of the results showed that formation of efficient hybrid networks enhanced the mechanical properties of hybrid filler nanocomposites through increasing effective stress transfer, retardation of flaw formation, emerging microcrack growth and dissipation of additional mechanical energy.
1 October 2019 in International Journal of Biological Macromolecules
Skin, the largest organ of the human body, accounts for protecting against external injuries and pathogens. Despite possessing inherent self-regeneration capabilities, the repair of skin lesions is a complex and time-consuming process yet vital to preserving its critical physiological functions. The dominant treatment involves the application of a dressing to protect the wound, mitigate the risk of infection, and decrease the likelihood of secondary injuries. Pursuing solutions for accelerating wound healing has resulted in groundbreaking advancements in materials science, from hydrogels and hydrocolloids to foams and micro-/nanofibers. Noting the convenience and flexibility in design, nanofibers merit a high surface-area-to-volume ratio, controlled release of therapeutics, mimicking of the extracellular matrix, and excellent mechanical properties. Core-shell nanofibers bring even further prospects to the realm of wound dressings upon separate compartments with independent functionality, adapted release profiles of bioactive agents, and better moisture management. In this review, we highlight core-shell nanofibers for wound dressing applications featuring a survey on common materials and synthesis methods. Our discussion embodies the wound healing process, optimal wound dressing characteristics, the current organic and inorganic material repertoire for multifunctional core-shell nanofibers, and common techniques to fabricate proper coaxial structures. We also provide an overview of antibacterial nanomaterials with an emphasis on their crystalline structures, properties, and functions. We conclude with an outlook for the potential offered by core-shell nanofibers toward a more advanced design for effective wound healing.