In Japan, there has been an increase in the number of buildings built using cross-laminated timber (CLT) in order to utilize the abundant forest resources in the country. However, no studies have evaluated the environmental impact of the construction of CLT buildings in Japan. This study evaluates the environmental impacts from the start of construction to the completion of a real CLT building in Kumamoto city, Kyushu region, southern Japan. We investigated the input of the materials and energy used in the construction of the building. The environmental impact categories evaluated include climate change, ozone layer depletion, eutrophication, acidification, and photochemical oxidation. We found that the concrete used for the foundations, and the cement-based soil stabilizer used for ground reinforcement accounted for 42% of the greenhouse gas (GHG) emissions. The construction site was previously used as a seedbed field, necessitating ground reinforcement. Furthermore, the large foundations were designed in order to raise the low height of the wooden structure from the ground level. Developing and applying methods with lower environmental impacts for ground reinforcement and building foundations is recommended. In addition, we found that by using biomass-derived electricity in CLT manufacturing, the environmental impacts of CLT manufacturing could be reduced, thus reducing the environmental impacts of the entire building. The biogenic carbon fixed in the wooden parts during the building usage accounted for 32% of the total GHG emissions of the building construction. Since this biogenic carbon will be released to the atmosphere at the end-of-life stage of the building, a long-term usage of the CLT buildings and/or reuse of the CLT is recommended.
Low-rise buildings in Japan are predominantly made of wood. Furthermore, the government promotes the use of wood in mid- and high-rise buildings to tackle climate change. Therefore, the environmental impact of structural lumber should be assessed. In this study, we evaluated greenhouse gas (GHG) emissions and resource consumption associated with structural lumber production using life cycle assessment. Herein, we focused on Japanese Agricultural Standard certified structural lumber (artificially dried lumber and machine-grade structural lumber) made from Japanese roundwood. To ensure representativeness, 15 companies and 15 sawmills covering more than 50% of Japan's structural lumber production were selected and data on their production were collected. The results show that the GHG emissions and resource consumption of Japanese structural lumber are 7.99 × 10 kg-CO2e/m3 and 1.77 × 10–3 kg-Sb eq./m3, respectively. The major sources of GHG emissions are electricity and roundwood production. Roundwood and metal tools significantly affect resource consumption. The recycling of rare metals in tools is essential for reducing resource consumption. A significant amount of heat energy is utilized for drying, and this heat energy is supplied from both biomass and fossil fuels. GHG emissions and resource consumption are 5.3 and 1.6 times higher, respectively, if biomass fuel is replaced by fossil fuel. Policies supporting the introduction of biomass boilers have been highly effective. It is recommended to further promote measures such as replacing fossil fuel-based boilers with biomass boilers and effectively utilizing biomass boilers in multiple regional sawmills. In addition, switching from grid electricity to electricity generated by renewable energy sources is effective for further reducing environmental impacts. The long-term use of structural lumber is valid for combating global warming because it fixes carbon for decades. In this study, the CO2 emissions from biomasaluated in terms of carbon neutrality. Appropriate forest management is a prerequisite for carbon neutrality, and the promotion of sustainable forest management, such as reforestation after logging, is crucial.